Unibor
Unibor Multicut Impact Shank Step Drill 1/4in-3/4in
Cuts hole sizes from 1/4 inch to 3/4 inch using an impact-rated shank for fast drilling
- Drills holes from 1/4in to 3/4in in a single pass
- Impact-rated shank withstands high-torque drivers
- Multicut geometry reduces walking on start
- Unibor brand built for professional tool users
- Free manufacturer shipping on orders over $75
Multicut Impact Step Drill 1/4in–3/4in
The Unibor 06X2EIMP is a step drill bit with an impact-rated shank designed for use with impact drivers. It cuts holes from 1/4 inch up to 3/4 inch in a single pass, making it suited for electricians, plumbers and metal fabricators who need quick, repeatable hole sizes in sheet metal and thin plate.
Impact Driver Compatibility And Step Limits
The 1/4-inch hex shank fits standard impact drivers, but the tool is not intended for heavy-duty drilling in thick structural steel or hardened alloys. Each step increments the diameter, so the largest hole you can produce is fixed at 3/4 inch; deeper or larger bores require a different bit or a dedicated hole saw.
Check Chuck Grip And Material Thickness
Verify that your impact driver accepts a 1/4-inch hex shank and delivers enough torque for the material you plan to drill. The bit works best on sheet metal, plastic and thin-walled tubing; if your workpiece exceeds the practical thickness for a step drill, consider a twist bit or annular cutter instead.
Highlights
- Drills holes from 1/4in to 3/4in in a single pass
- Impact-rated shank withstands high-torque drivers
- Multicut geometry reduces walking on start
- Unibor brand built for professional tool users
- Free manufacturer shipping on orders over $75
Specifications
| Brand | UNIBOR |
|---|
Questions about this item
Should I choose the 1/4in-3/4in Multicut Impact Shank Step Drill or another size range?
The 1/4in-3/4in range covers common hole sizes in one bit, reducing tool changes on site.
How does the Multicut Impact Shank perform when drilling steel with an impact driver?
The impact-rated shank transfers high torque without slipping, letting the stepped flutes cut clean holes in metal.
What does the 1/4in hex shank limit in terms of chuck compatibility?
The 1/4in hex shank fits standard impact-driver chucks and quick-change adapters, but not 1/2in drill chucks without an adapter.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
