Unibor
Unibor 27224 carbide cutter and pilot pneumatic accessory
Tungsten carbide tipped annular cutter with pilot for steel, featuring a universal shank and two-inch depth of cut
- Tungsten carbide tips cut any steel type
- 2 inch depth of cut handles thick material
- 3/4 universal shank fits all brands
- Designed for truck frame applications
- New condition ready for immediate use
Unibor 27224 carbide cutter overview
The Unibor 27224 is a tungsten carbide tipped annular cutter with a 3/4 inch universal shank designed for drilling steel. It suits fabricators and maintenance crews who need reliable hole cutting in structural materials such as truck frames. The 2 inch depth of cut handles thick workpieces in a single pass. New condition ensures full cutting life from the first use.
Universal shank compatibility benefit
The 3/4 inch universal shank fits all brands of magnetic drills and drill presses without adapters. This reduces setup time and lets operators switch between machines on site. The tungsten carbide tips maintain sharpness longer than high speed steel when cutting abrasive or hardened steels. Standard shipping thresholds do not affect the tool’s performance.
Annular cutter depth constraint
The fixed 2 inch depth of cut limits the maximum material thickness that can be drilled in one operation. Thicker plates require multiple passes or a longer cutter not included here. The universal shank does not alter the cutting geometry or chip evacuation of the host machine. Buyers needing greater reach must select a different model.
Highlights
- Tungsten carbide tips cut any steel type
- 2 inch depth of cut handles thick material
- 3/4 universal shank fits all brands
- Designed for truck frame applications
- New condition ready for immediate use
Specifications
| Brand | UNIBOR |
|---|
Questions about this item
When will the tungsten carbide tips on the 27224 cutter need replacement?
The tungsten carbide tips last through many cuts in steel; replace them when cutting speed drops or holes become oversized.
What limits continuous drilling with the 27224 annular cutter?
Heat buildup in the cutter body and chip evacuation are the first limits during sustained use; pause to clear chips and cool.
How much noise and heat does the 27224 produce during all-day pneumatic drilling?
Expect typical pneumatic tool noise and moderate heat at the cutter; use hearing protection and cutting fluid to manage both.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
