We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Orange polyurethane square drain seal 36 in by 36 in 375 mil thickness

Ultratech, Inc.

Ultratech, Inc. 2130 Drain Seal 36 in 375 mil personal protective equipment

SKU CH-16FN-1EXGG

A 36-inch square polyurethane drain seal rated for temperatures up to 225°F and compliant with NPDES and SPCC standards

  • Reusable seal cuts waste and replacement cost
  • 36 in square covers drains up to 30 in
  • 375 mil polyurethane resists tears and chemicals
  • Withstands 225 °F liquid for 30 minutes
  • Meets NPDES and SPCC compliance standards

36 in Urethane Drain Seal

The Ultratech 2130 is a square polyurethane drain seal measuring 36 in by 36 in. It creates a positive seal over drains up to 30 in by 30 in. The 375 mil thick urethane material is tear resistant and coloured orange for visibility. It is designed for spill containment and environmental compliance.

Temperature and storage limits

The seal withstands a maximum liquid temperature of 225F for up to 30 minutes. Continuous service temperature is rated to 160F. Storage temperature must stay between 0F and 120F. Exceeding these limits can degrade the polyurethane and compromise the seal.

NPDES and SPCC compliance

This drain seal meets NPDES and SPCC standards for spill prevention. It is reusable for multiple deployment cycles. The product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm under Proposition 65. Buyers needing a different size or material should consider alternative options.

Highlights

  • Reusable seal cuts waste and replacement cost
  • 36 in square covers drains up to 30 in
  • 375 mil polyurethane resists tears and chemicals
  • Withstands 225 °F liquid for 30 minutes
  • Meets NPDES and SPCC compliance standards

Specifications

BrandULTRATECH

Questions about this item

Which drain seal size should I choose for a 30 by 30 inch drain?

The 36 by 36 inch Ultratech 2130 covers drains up to 30 by 30 inches, so this single size fits that opening.

What does the 375 mil thickness mean when the seal is in place?

At 375 mil the polyurethane sheet is heavy-duty, giving a positive seal that resists tearing and handles liquid up to 225 °F for 30 minutes.

What standards does the NPDES and SPCC listing cap in practice?

NPDES and SPCC compliance means the seal meets federal storm-water and spill-prevention requirements for containment use.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.