60/40 Low Melt Tin Lead Rosin Core Solder Wire 0.8mm 50g
- lead, soldering wire
$13.99
0.00016406BTC
In stock
Ultratech, Inc.
Ultratech, Inc. 1803 Cable Protector Extension
Single-channel cable protector with snap-together design for extension cords and network cables, rated for 32000 lb axle loads
- TypeCable Management & Conduit
- Protects cables up to 3/8 in diameter with a single-channel drop-over design
- Snap-together sections extend coverage for extension cords and network cables
- ABS construction supports 32,000 lb axle loads in industrial environments
- Low 3/4 in profile meets ADA requirements for pedestrian pathways
- Lightweight 1 lb unit installs quickly without tools or permanent mounting
Cable protector for floor-level cord routing
The Ultratech 1803 is a single-channel cable protector designed to cover extension cords, network cables, telephone cords and wires on the ground. Its drop-over style lets users lay cables underneath without disconnecting them. The unit supports a maximum cable diameter of 3/8 in and carries a load capacity of 32,000 lb per axle. It is suited for temporary indoor or outdoor pathways where vehicle traffic crosses cord runs.
Snap connection and ADA compliance affect deployment
The snap-together connection style allows multiple units to join end-to-end for longer continuous runs without tools. The product meets ADA requirements, meaning the low 3/4 in profile and bevelled edges reduce tripping hazards and allow wheelchair passage. Black ABS construction resists impact and weather while remaining lightweight enough for one person to position and relocate as needed.
Simple drop-over installation with alignment care
Installation consists of opening the hinged lid, laying the cable in the 3/4 in wide by 3/8 in high channel, and snapping the lid shut. Units connect by aligning the snap tabs on the 13 1/8 in length. The most common issue is debris preventing the snaps from fully engaging, which can leave a gap at the joint. Ensuring the channel is clean before closing the lid avoids pinching the cable.
Highlights
- Protects cables up to 3/8 in diameter with a single-channel drop-over design
- Snap-together sections extend coverage for extension cords and network cables
- ABS construction supports 32,000 lb axle loads in industrial environments
- Low 3/4 in profile meets ADA requirements for pedestrian pathways
- Lightweight 1 lb unit installs quickly without tools or permanent mounting
Specifications
| Brand | ULTRATECH |
|---|---|
| Type | Cable Management & Conduit |
Questions about this item
Will the ABS housing crack or need replacement after repeated vehicle traffic?
The ABS construction handles a 32,000 lb axle load, so the housing itself will not need replacement under normal rolling traffic.
What stops the protector from holding larger cables during continuous use?
The single channel accepts a maximum cable diameter of 3/8 in, so thicker cords cannot be accommodated.
Does the black ABS surface get hot or noisy when driven over all day?
The material produces no mechanical noise and does not generate heat from vehicle passes.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
