We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black ABS cable protector with single channel, 39 in long, drop-over style

Ultratech, Inc.

Ultratech, Inc. 1802 Cable Protector 1 Channel 39 in Length

SKU CH-Z10Q-8BFP5

A single-channel cable protector covering cords up to 3/8 in diameter with a 32,000 lb axle load rating

  • TypeCable Management & Conduit
  • Supports heavy vehicle traffic with 32,000 lb axle rating
  • Protects cables up to 3/8 in diameter in single channel
  • Drop-over design enables quick installation without tools
  • ADA compliant for accessible pathway requirements
  • Lightweight ABS construction weighs 1 lb for easy transport

Single-channel cable protector for temporary cord

The Ultratech 1802 provides one channel to cover extension cords, network cables, telephone cords or loose wires across walkways. Its drop-over style lets users lay the protector over existing cables without unplugging them. The ABS construction supports a 32,000 lb per axle load capacity for vehicle traffic. Black finish keeps the unit visible on dark surfaces.

Channel limited to 3/8 inch maximum cable diameter

Only cords up to 3/8 in thick fit inside the single channel, so thicker power cables or bundled feeds will not sit properly. The 39 in overall length covers a short span; longer runs require multiple units placed end to end. Snap connections join sections but do not lock against lateral movement under heavy rolling loads. ADA compliance is not claimed for this model.

Drop-over installation needs flat, clean surface

Simply position the protector over the cords and press down; no tools or fasteners are required. Dirt, gravel or uneven flooring can prevent the snap joints from engaging fully, creating trip edges. The low 3/4 in profile reduces tripping risk but offers minimal ramp for wheeled carts. Ensure each section sits flush before allowing traffic.

Highlights

  • Supports heavy vehicle traffic with 32,000 lb axle rating
  • Protects cables up to 3/8 in diameter in single channel
  • Drop-over design enables quick installation without tools
  • ADA compliant for accessible pathway requirements
  • Lightweight ABS construction weighs 1 lb for easy transport

Specifications

BrandULTRATECH
TypeCable Management & Conduit

Questions about this item

Should I choose the 39 in single-channel protector or look for a multi-channel version?

This model provides one channel 3/4 in high by 3/4 in wide, suitable for a single cord up to 3/8 in diameter; add more units side-by-side if you need parallel runs.

What does the 32,000 lb axle load mean when the protector is on a warehouse floor?

It certifies the ABS body can withstand a 32,000 lb axle rolling across the 39-1/2 in length without crushing the cable underneath.

How does the snap-together connection style affect the maximum continuous length I can build?

Each 39-1/2 in section interlocks with the next, so you can extend the run indefinitely while keeping the 3/4 in channel height and 32,000 lb axle rating intact.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.