Ultra Clarity Cables Cat 6 Ethernet Cable 100 ft Outdoor Indoor Gaming Black
100 ft Cat 6 UTP patch cable with solid 24 AWG copper, 500 MHz bandwidth and gold-plated RJ45 connectors for 10 Gbps indoor or outdoor runs
- TypeEthernet
- Cat6
- Connector ARJ45
- ColorBlack
- Features, , , ,
- Supports up to 10 Gbps for fast gaming and streaming
- 500 MHz bandwidth reduces lag on busy networks
- 100 ft length reaches distant rooms without extra joins
- Outdoor-rated PVC jacket withstands sun and moisture
- Gold-plated RJ45 contacts resist corrosion for lasting signal quality
100 ft Cat 6 cable for 10 Gbps LAN
This 100 ft Cat 6 Ethernet cable supports frequencies up to 500 MHz and 10 Gbps speeds for wired home and office networks. It uses 24 AWG solid copper conductors with PE cross insulation to reduce crosstalk. The 5.8 mm PVC jacket and molded strain relief boots protect the RJ45 connectors with gold-plated contacts. The cable is rated for both indoor and outdoor use.
Suits runs up to 100 ft at 10 Gbps.
Builders wiring a 100 ft segment at up to 10 Gbps will find this cable matches the published frequency and speed ratings. Installers needing runs beyond 100 ft or shielded construction for noisy environments should look at other options. The unshielded twisted-pair design meets standard Cat 6 performance for the stated length.
10 Gbps at 500 MHz over 100 ft
The decisive specification is the 500 MHz bandwidth enabling 10 Gbps transmission across the full 100 ft length. This confirms the cable meets 10GBASE-T requirements for the distance installed. If your network operates at 1 Gbps or slower, the cable still works but the extra headroom is the reason to choose this spec.
Highlights
- Supports up to 10 Gbps for fast gaming and streaming
- 500 MHz bandwidth reduces lag on busy networks
- 100 ft length reaches distant rooms without extra joins
- Outdoor-rated PVC jacket withstands sun and moisture
- Gold-plated RJ45 contacts resist corrosion for lasting signal quality
Specifications
| Brand | Ultra Clarity Cables |
|---|---|
| Type | Ethernet |
| Cat | 6 |
| Connector A | RJ45 |
| Color | Black |
| Features | , , , , |
Questions about this item
How do I install the 100 ft Cat 6 cable without damaging the RJ45 connectors?
Route the 5.8 mm PVC jacket along walls or conduit, then press each RJ45 plug straight into the port until the tab clicks; the molded strain relief boots stop the latch from snagging on carpet edges or sharp corners, which is the step most people rush and break.
What maintenance will the solid copper 24 AWG conductors and gold-plated contacts need over time?
No scheduled maintenance is required; if a connector gets dusty, blow it out with compressed air and wipe the gold-plated contacts with a dry lint-free cloth — never use liquid cleaners on the RJ45 ends.
At what point does the 500 MHz bandwidth limit appear during a sustained 10 Gbps transfer?
The cable is rated for 500 MHz up to 100 ft; beyond that length the 10 GBASE-T signal drops below spec, so the 100 ft mark is the first hard limit under continuous high-speed load.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



