We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black quick-release nylon propellers with install kit for Phantom 4

Ultimaxx

Ultimaxx Phantom 4 Quick Release Nylon Propeller Set with Install Kit (Black)

SKU CH-7V91-CA049

Quick-release nylon propeller set for the Phantom 4 with two clockwise and two counter-clockwise blades, each weighing 11 g at 9.45 × 5 inches, plus an install kit

  • Designed exclusively for Phantom 4 drones
  • Quick-release 9450 propellers install without tools
  • Two clockwise and two counter-clockwise blades included
  • Each propeller weighs 11 g for balanced flight
  • 45 × 5 inch diameter and pitch specification

DJI Phantom 4 Quick-Release Propeller Set

This set supplies two clockwise and two counter-clockwise nylon propellers built exclusively for the DJI Phantom 4 airframe. The quick-release mounting lets pilots swap blades without tools, keeping pre-flight checks fast and straightforward. Each blade weighs 11 g and follows the 9450 specification for direct compatibility.

Sustained flight behaviour

The 9.45 × 5 inch pitch delivers consistent thrust during extended hover and forward flight, reducing vibration buildup that can appear in shorter bursts. Balanced clockwise and counter-clockwise pairs keep yaw authority stable over long missions. Nylon construction resists fatigue cracking better than brittle alternatives when run continuously.

Installation notes

Quick-release hubs click onto the motor shafts in seconds, and the included install kit provides the exact hardware needed for a secure fit. The most common error is mixing the rotation directions, which causes immediate flip-over on take-off. Pilots who skip the pre-flight spin check risk losing a blade mid-air.

Highlights

  • Designed exclusively for Phantom 4 drones
  • Quick-release 9450 propellers install without tools
  • Two clockwise and two counter-clockwise blades included
  • Each propeller weighs 11 g for balanced flight
  • 45 × 5 inch diameter and pitch specification

Specifications

No published specifications for this item yet.

Questions about this item

How much power draw or heat should I expect from the 11 g 9450 propellers during all-day flights?

The 11 g 9450 propellers add negligible weight and no active electronics, so they do not increase power draw or heat beyond the Phantom 4's normal motor load.

What must I already own to install and use this quick-release propeller set?

You need a DJI Phantom 4 airframe with its original motors and quick-release hubs; the kit includes only the four 9450 propellers and installation hardware.

Will these 9.45 × 5 inch 9450 props fit older Phantom 3 or Inspire 1 motors I might keep as spares?

No, the 9450 quick-release design is exclusive to the Phantom 4 and will not lock onto Phantom 3, Inspire 1 or any other DJI motor hubs.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.