We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Clear plastic lens cap and gimbal stabilizer shaped for Mavic 2 Pro camera housing

Ultimaxx

Ultimaxx Lens Cap Gimbal Stabilizer Clear for Mavic 2 Pro

SKU CH-QT8V-KNJFV

Clear integrated cover protects the Mavic 2 Pro gimbal, camera and front 3D sensors from dust, scratches and bumps while preventing gimbal rocking during transport

  • Protects gimbal, camera and front 3D sensor from dust, scratches and bumps
  • Prevents gimbal rocking and extends wiring lifetime during transport
  • Lightweight design adds minimal weight to the drone
  • Installs and removes in just two simple steps
  • Clear construction keeps sensors visible while covered

Integrated Gimbal Cover for Mavic 2 Pro

This clear lens cap is moulded specifically for the DJI Mavic 2 Pro. It shields the gimbal, camera lens and forward 3D sensor screen in a single piece. Pilots who want a dedicated guard that stays aligned during transport will find it fits the aircraft precisely.

Dust, Scratch and Impact Protection

The cover blocks dust and grit from settling on optical surfaces and prevents scratches or bumps while the drone is stored or carried. By holding the gimbal steady it stops the mechanism from rocking, which reduces strain on the internal wiring and helps extend its service life. No power or moving parts are involved.

Simple Two-Step Installation

The accessory snaps on and off in two steps, making it quick to fit before a flight and remove at power-up. A built-in reminder prompts the pilot to take it off before take-off, avoiding accidental flight with the cover in place. Only the cover itself is supplied; the drone is not included.

Highlights

  • Protects gimbal, camera and front 3D sensor from dust, scratches and bumps
  • Prevents gimbal rocking and extends wiring lifetime during transport
  • Lightweight design adds minimal weight to the drone
  • Installs and removes in just two simple steps
  • Clear construction keeps sensors visible while covered

Specifications

No published specifications for this item yet.

Questions about this item

How do you fit the Ultimaxx lens cap onto the Mavic 2 Pro gimbal without forcing it?

Align the integrated cover with the camera, front 3D sensor screen and gimbal arms, then press gently until it clicks — the two-step design locks it in place without tools.

What part of the cover will wear out first and need replacing?

The flexible retention clips that grip the gimbal arms lose tension over time; when the cap no longer stays secure during transport, swap in a new cover.

What is the first limit you hit when leaving the cap on during repeated flights?

The cover must be removed before powering on; leaving it fitted blocks the gimbal self-check and front 3D sensors, causing an immediate error and aborted take-off.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.