We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four clear 3 metre JST SM extension cables male to female 22AWG

Ulifebet Lightning 3M 9.84FT 22AWG 3 Pin JST SM Male Female LED Extension Cable

SKU CH-3DRW-BJ1VD

Four 3-metre JST SM extension cables connect addressable LED strips to controllers up to 9.84 ft away using 22 AWG wire rated for 5 V to 24 V operation

  • FeaturesThis 3M/9.84FT power extension cord is made by Ulifebet and
  • 3 m length bridges gaps between strips and controllers
  • 22 AWG conductors keep voltage drop low over the full run
  • Plug-and-play JST SM connectors install without soldering
  • Rated 5 V to 24 V for WS2812B, WS2811, WS2814 and SK6812 strips
  • Four cables included so multiple zones can be wired at once

Ulifebet Lightning 3M Extension Cable

This 3 metre LED extension cable from Ulifebet uses 22AWG wire with 3 pin JST SM male and female connectors. It carries low-voltage power from 5V to 24V at up to 2 amps and is UL listed for safety. The transparent PVC jacket stays flexible for routing around corners. Each pack contains four identical cables ready for immediate use.

Replaces Short Factory Leads

The 9.84ft length bridges gaps between controllers and strips that stock cables cannot reach. It removes the need to solder joints when extending WS2812B, WS2811, WS2814, SK6812, FCOB or RGB CCT installations. The push-in connectors make the upgrade reversible and tool-free. Voltage drop stays low thanks to the 22AWG conductors over the full run.

Check Polarity And Controller Match

Verify that your controller uses the same 3 pin JST SM layout and that wire colours red, green and white align with positive, data and ground. Confirm the strip operates within the 5V to 24V range and draws no more than 2 amps per cable. The cable is rated to 80°C ambient temperature. It fits SP105E, SP107E, SP108E and SP602E controllers directly.

Highlights

  • 3 m length bridges gaps between strips and controllers
  • 22 AWG conductors keep voltage drop low over the full run
  • Plug-and-play JST SM connectors install without soldering
  • Rated 5 V to 24 V for WS2812B, WS2811, WS2814 and SK6812 strips
  • Four cables included so multiple zones can be wired at once

Specifications

BrandUlifebet
ModelLightning
FeaturesThis 3M/9.84FT power extension cord is made by Ulifebet and features a style with material. It supports a voltage of and an input current of 2 amps. The cable is Transparent/clear in color and is UL listed. It comes with a Male-to-Female connector and does not require batteries.

Questions about this item

What length and wire gauge do I need to reach my LED strip?

Each cable is 3M or 9.84FT long and uses 22AWG conductors, supplied as a pack of four.

How do I connect the cable without soldering?

Push the 3-pin JST SM male plug into the female socket on the strip or controller until it clicks; match the red, green and white wires to the correct polarity before powering up.

What voltage range and temperature rating apply for long-term use?

The cable is rated for 5V to 24V low-voltage applications and carries an 80°C temperature rating.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.