We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small grey metal box with six RJ45 ports and a mode button

UGREEN 6 Port PoE Switch 4 PoE+ 60W 2 Gigabit Uplink

SKU CH-FJKP-ZQ3K7

Six-port unmanaged switch with four PoE+ ports sharing a 60W budget and two gigabit uplinks, plus selectable standard, VLAN isolation or 820 ft extend modes

  • Primary Port Count6
  • Primary Ports16 x SFP + 8 x RJ45
  • Jumbo Frames9216 bytes
  • Packet Forwarding Rate1000 megabits_per_second
  • SNMPNo
  • Layer 2 Features1000 megabits_per_second, 6
  • 4 PoE+ ports deliver up to 30W each for cameras
  • 60W total budget with auto priority cut-off at 41
  • One button switches Standard, VLAN isolation or Extend mode
  • Extend mode reaches 820 ft for long-distance security deployments
  • Plug-and-play metal chassis with 1000Mbps uplink for zero-setup networking

Six-port PoE switch for cameras and access points

This UGREEN switch provides four PoE+ Gigabit ports with a 60 W total budget and two additional Gigabit uplink ports. It suits installers who need to power IP cameras, wireless access points or VoIP phones from a single unmanaged unit. The metal enclosure and plug-and-play design make it practical for small business or home-security deployments.

Check power budget and cable runs before ordering

Each PoE+ port can deliver up to 30 W, but the combined draw must stay within 60 W; the switch will disable ports in priority order if the limit is exceeded. Uplink ports are data-only, so plan separate power for any non-PoE devices connected there. Extend mode stretches PoE reach to 820 ft at reduced speed, so verify that distance matches your layout.

One button toggles three operating modes

Standard mode passes traffic normally across all six ports. Port Isolation (VLAN) separates ports 1 to 4 to stop broadcast storms between cameras. Extend mode lowers the link rate to carry PoE up to 820 ft for long cable runs. Indicator LEDs show link, speed and PoE status for quick troubleshooting.

Highlights

  • 4 PoE+ ports deliver up to 30W each for cameras
  • 60W total budget with auto priority cut-off at 41
  • One button switches Standard, VLAN isolation or Extend mode
  • Extend mode reaches 820 ft for long-distance security deployments
  • Plug-and-play metal chassis with 1000Mbps uplink for zero-setup networking

Specifications

BrandNETGEAR
SeriesProSafe
Part Number35371US
Primary Port Count6
Primary Ports16 x SFP + 8 x RJ45
Jumbo Frames9216 bytes
Packet Forwarding Rate1000 megabits_per_second
SNMPNo
Layer 2 Features1000 megabits_per_second, 6
Layer 3 Features35371US
Buttonpush_button
Certificationnot_applicable
Features6, push_button, 1000 megabits_per_second, Metal, Gray

Questions about this item

What comes in the box and do I need to buy cables or a power supply separately?

The switch ships with its own power adapter and mounting hardware. You supply the Ethernet cables — up to 100 m in Standard mode or 250 m in Extend mode — and any PoE devices you want to connect.

How do I decide between Standard, Port Isolation and Extend mode using the front button?

Press the mode button once for Standard, twice for Port Isolation which separates ports 1 to 4, or three times for Extend mode which pushes PoE reach to 250 m at 10 Mbps.

What does the 60 W total budget mean when I plug in four PoE+ cameras?

Each PoE+ port can supply up to 30 W, but the 60 W cap means the switch will shut down ports in priority order 41 if the combined draw exceeds 60 W.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.