We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
UEI EM201SPKIT digital manometer kit with hoses and case

Uei Test Instruments

Uei Test Instruments EM201SPKIT static pressure test kit 60 in wc

SKU CH-3V5D-MN40C

Measures gas pressure from -60 to 60 in wc with ±0.02 in WG accuracy below 3 in wc and includes a 4-digit backlit LCD display

  • TypeElectronic
  • Measures static pressure up to 60 in wc
  • Reads down to -60 in wc for negative pressure
  • Accuracy ±0.02 in WG below 3 in wc
  • 1 % reading accuracy above 3 in wc
  • Backlit 4-digit LCD with auto power-off

Static pressure test kit

The Uei Test Instruments EM201SPKIT static pressure test kit measures gas pressure from -60 in wc to 60 in wc. Accuracy is +/- 0.02 in WG below 3 in wc and +/-1 PercentRDG above that threshold. A four-digit backlit LCD shows readings in in wg, mbar, Pa or psi.

HVAC technicians measuring duct pressure

This kit suits HVAC technicians who need portable gas-pressure verification. It does not measure air velocity or air volume, so engineers requiring those parameters should look at something else. The hose-barb connection accepts 1/4 in tubing for direct hook-up.

Batteries and digital display included

Batteries are supplied so the unit works immediately out of the case. The backlit LCD ensures readability in dim plant rooms or ceiling voids. Auto power-off preserves battery life during intermittent use.

Highlights

  • Measures static pressure up to 60 in wc
  • Reads down to -60 in wc for negative pressure
  • Accuracy ±0.02 in WG below 3 in wc
  • 1 % reading accuracy above 3 in wc
  • Backlit 4-digit LCD with auto power-off

Specifications

BrandUEI TEST INSTRUMENTS
TypeElectronic

Questions about this item

What system pressure range should my ductwork operate within for the EM201SPKIT to read accurately?

The kit measures from -60 to 60 in wc, covering typical residential and light-commercial static-pressure tests.

Will the 1/4 in hose barb connections fit the pressure taps on my older manometer accessories?

Yes, the 1/4 in hose barb process connections accept standard tubing used with most legacy HVAC test ports.

How do I confirm the backlit LCD is showing correct readings after I power on the EM201SPKIT?

Apply a known reference pressure; the display should read within +/- 0.02 in WG below 3 in wc or within +/- 1 % of reading above 3 in wc.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.