Ubiquiti Networks
Ubiquiti Networks Wave AP Micro 60 GHz PtMP access point
Outdoor 60 GHz PtMP access point with 5 Gbps throughput, 90° sector coverage and 5 GHz backup radio
- # of Users15
- WiFi GenerationWi-Fi 6
- Frequency BandRF Operating frequency* 57–71 GHz *Depends on regulatory reg
- Mounting LocationOutdoor
- Operating RangeOutdoor: Up to 6km
- LEDsPower Flashing white: bootup in progress White: not connecte
- 60 GHz PtMP coverage up to 6 km for long-range links
- 5 Gbps total throughput with 2.5 Gbps duplex for high capacity
- 90° sector antenna serves up to 24 Wave clients per sector
- 5 GHz weatherproof backup radio delivers 800 Mbps failover link
- 5 GbE PoE port powers the unit with a single cable
60 GHz PtMP access point for up to 15 users
The Ubiquiti Networks Wave AP Micro is a wide-coverage 60 GHz point-to-multipoint access point built on Wave Technology. It supports up to 15 connected users and operates in the 57–71 GHz band with channel bandwidths of 2160, 1080, or 540 MHz. A 5 GHz weatherproof backup radio provides additional link resilience. The unit is designed for outdoor mounting and managed through the UISP application.
Outdoor-rated thermal range and passive PoE power
The access point operates reliably from -40 to 60 °C (-40 to 140 °F) in 5 to 95 % non-condensing humidity without active cooling. Power is delivered via PoE through the single 2.5 GbE RJ45 port, eliminating the need for a separate power supply at the mount point. The quad-core ARM Cortex-A53 processor at 1.4 GHz and 512 MB DDR3L memory handle routing and Wave AI tasks within this thermal envelope.
Sector coverage and backup radio change deployment
The integrated 90 ° sector antenna defines the service area, while the 5 GHz backup radio adds up to 800 Mbps throughput if the 60 GHz link degrades. A factory reset button and multi-colour LED status indicators assist with installation and troubleshooting. The package includes the mounting hardware required for outdoor pole or wall attachment, and the UISP software provides ping watchdog, NTP client, and discovery protocol services.
Highlights
- 60 GHz PtMP coverage up to 6 km for long-range links
- 5 Gbps total throughput with 2.5 Gbps duplex for high capacity
- 90° sector antenna serves up to 24 Wave clients per sector
- 5 GHz weatherproof backup radio delivers 800 Mbps failover link
- 5 GbE PoE port powers the unit with a single cable
Specifications
| Brand | Ubiquiti Networks |
|---|---|
| Series | Wave 60 GHz |
| Model | Wave-AP-Micro |
| # of Users | 15 |
| WiFi Generation | Wi-Fi 6 |
| Frequency Band | RF Operating frequency* 57–71 GHz *Depends on regulatory region. Channel bandwidth 2160, 1080, 540* MHz *FW version 3.3.0 and later. Operating channels* 58320, 59400, 60480, 61560, 62640, 63720, 64800, 65880, 66960, 68040, 69120, 70200 MHz *Depends on regulatory region. Modulation 16QAM, QPSK Antenna gain 20 dBi Polarization Vertically linear Beamwidth Azimuth: 3 dB 90° Elevation: 3 dB 7° Electrical downtilt 0° Back-Up RF WiFi standard 802.11ax (WiFi 6) Operating frequency* US/CA Worldwide U-NII-1 5150 - 5250 MHz U-NII-2A 5250 - 5350 MHz U-NII-2C 5470 - 5725 MHz U-NII-3 5725 - 5850 M |
| Mounting Location | Outdoor |
| Operating Range | Outdoor: Up to 6km |
| LEDs | Power Flashing white: bootup in progress White: not connected to UISP application Blue: connected to UISP application Flashing blue: locate in progress Blue/white: firmware upgrade in progress Ethernet Flashing blue: Ethernet traffic detected GPS Blue: receiving at least(4) GPS satellite signal Link Blue: 60 GHz link White: 5 GHz link |
| Buttons | Factory reset |
| LAN Ports | (1) 1/2.5 GbE RJ45 port |
| Power Supply | PoE |
| Temperature | -40 to 60° C (-40 to 140° F) |
| Humidity | 5 to 95% noncondensing |
| Dimensions | 284 x 156 x 76 mm (11.2 x 6.1 x 3") |
| Weight | 1.3 kg (2.9 lb) |
| Features | Hardware Processor Quad-core ARM® Cortex®-A53 at 1.4 GHz Memory DDR3L 512 MB Software Operating mode PtMP access point Ubiquiti specific features Wave AI, discovery protocol Services UISP, ping watchdog, NTP client, SNMP Tools Antenna alignment, discovery utility, ping, trace route, speed test, cable test*, site survey* *FW version 3.3.0 and later. Network Bridge mode Application requirements UISP web: Version 2.2.11 and later UISP mobile iOS™: Version 2.25.1 and later UISP mobile Android™: Version 2.27.5 and later System Total throughput 5 Gbps (2.5 Gbps duplex) Supported clients co |
| Shipping weight | 2.27 kg |
| Package size | 307 × 180 × 154 mm |
Questions about this item
How do I mount the Wave AP Micro for a 6 km outdoor link and what alignment step is often missed?
Mount the unit outdoors using the integrated bracket, aim the 90° sector toward the client radios, then use the UISP discovery protocol and flashing-blue locate mode to fine-tune azimuth and elevation before locking the hardware.
Which components will need attention after extended outdoor deployment?
The PoE injector and RJ45 port seals should be inspected periodically; the quad-core ARM Cortex-A53 processor and 512 MB DDR3L memory have no user-serviceable parts, and the 5 GHz backup radio requires no scheduled maintenance.
What throughput limit appears first when the sector is fully loaded with 24 clients?
The aggregate 5 Gbps ceiling (2.5 Gbps duplex) on the 60 GHz radio is reached before the single 2.5 GbE WAN port or the 800 Mbps 5 GHz backup radio become bottlenecks.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



