Ubiquiti Networks
Ubiquiti Networks WAVE-AP-GEN2-US 5.40 Gbit/s wireless range extender
Extends 5 GHz Wi-Fi 6 coverage at 5.40 Gbit/s with a 10 Gigabit Ethernet port, IPX6-rated pole-mountable design and 24 W PoE power
- Frequency Band5 GHz
- Interface1 x Network (RJ-45) Port
- Power24 W; 48V DC PoE
- Dimensions6.2" W x 3.9" D x 11.3" H
- Weight3.31 lb
- FeaturesAI-powered; PoE PD; SNMP; IPX6 Rating; Pole-mountable
- 40 Gbit/s Wi-Fi 6 speed extends coverage to hard-to-reach areas
- 10 Gigabit Ethernet port optimises wired backbone performance
- AI-powered management simplifies network tuning and monitoring
- IPX6-rated enclosure withstands harsh outdoor conditions
- Pole-mountable design enables flexible placement on masts or walls
Outdoor Wi-Fi 6 extender
The Ubiquiti Wave AP Gen2 is a single-band 5 GHz wireless range extender rated at 5.40 Gbit/s. It runs the Wi-Fi 6 standard to extend coverage where a primary router cannot reach. The unit is designed for pole mounting and carries an IPX6 weather rating for outdoor deployment.
PoE and 10 Gbit Ethernet
Power arrives through 48V DC PoE at 24 W, so no separate mains adapter is required. The single RJ-45 port operates at 10 Gigabit Ethernet, letting the wireless link feed a high-speed wired backbone without bottlenecking throughput.
Rugged build for pole mounting
The enclosure measures 6.2" W x 3.9" D x 11.3" H and weighs 3.31 lb, built to withstand rain and dust per the IPX6 rating. Pole-mount hardware integrates directly with the chassis, so installation on a mast or wall bracket is straightforward and secure.
Highlights
- 40 Gbit/s Wi-Fi 6 speed extends coverage to hard-to-reach areas
- 10 Gigabit Ethernet port optimises wired backbone performance
- AI-powered management simplifies network tuning and monitoring
- IPX6-rated enclosure withstands harsh outdoor conditions
- Pole-mountable design enables flexible placement on masts or walls
Specifications
| Brand | Ubiquiti |
|---|---|
| Series | Wave AP Gen2 |
| Model | Wave AP Gen2 |
| Part Number | WAVE-AP-GEN2-US |
| Frequency Band | 5 GHz |
| Interface | 1 x Network (RJ-45) Port |
| Power | 24 W; 48V DC PoE |
| Dimensions | 6.2" W x 3.9" D x 11.3" H |
| Weight | 3.31 lb |
| Features | AI-powered; PoE PD; SNMP; IPX6 Rating; Pole-mountable |
| Shipping weight | 2.38 kg |
| Package size | 330 × 211 × 183 mm |
Questions about this item
Does the 48V DC PoE injector or cabling need periodic replacement?
The unit draws 24 W via 48V DC PoE; the injector and Cat6a cable are solid-state with no moving parts, so they rarely need replacement unless physically damaged.
What limits sustained throughput on the 10 Gigabit Ethernet port?
The 5 GHz radio tops out at 5.40 Gbit/s, so the 10 Gbit/s RJ-45 link will idle while the wireless link remains the bottleneck during continuous transfers.
How much heat and fan noise does the IPX6 enclosure produce at 24 W continuous load?
The sealed IPX6 housing relies on passive convection; at 24 W it runs warm to the touch but generates no fan noise because there are no active cooling components.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
