We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ubiquiti Networks

Ubiquiti Networks USWPRO48POE network switch 48 port 600W PoE

SKU CH-0ARV-GFR5B MPN USWPRO48POE

A managed Layer 2/3 switch with 48 RJ45 ports, four 10Gbps SFP+ uplinks and a 600W PoE budget for 40 PoE+ and eight PoE++ devices

  • FormatDesktop
  • Primary Ports48 x RJ45 + 4 x SFP
  • Primary Port Speed10/100/1000Mbps + 10 Gbps
  • PoE600W PoE budget
  • StackableYes
  • LayerLayer2 and Layer3
  • Layer 2 and Layer 3 switching with auto-sensing PoE+ and PoE++
  • 48 RJ45 ports plus 4 SFP+ ports for 10 Gbps uplinks
  • 600 W PoE budget powers 40 PoE+ and 8 PoE++ devices
  • 3 inch touch LCM for local configuration and monitoring
  • Near-silent cooling suits office and rack environments

Layer 3 PoE+ Switch for Enterprise Networks

The Ubiquiti USWPRO48POE is a managed Layer 2 and Layer 3 switch built for networks needing high-density power delivery. It provides forty-eight RJ45 ports with forty PoE+ and eight PoE++ interfaces. Four SFP+ ports supply 10 Gbps uplink connectivity. The 600W PoE budget supports extensive device deployments.

Near-Silent Operation with Touch LCM

The switch uses near-silent cooling suitable for noise-sensitive environments. An integrated 1.3 inch touch LCM offers direct status access. An internal 660W AC/DC power supply handles 100-240V AC input. A USP RPS DC input accepts 52V DC at 11.54A or 11.5V DC at 5.22A. Operating temperature reaches 40 degrees Celsius.

Upgrade from Non-PoE or Lower-Capacity Switches

This unit replaces switches lacking PoE or offering insufficient power budgets for access points and cameras. The jump is worth it when adding powered devices exceeds current port counts or wattage limits. Stackable design allows future expansion. It is not for buyers needing higher port speeds than 1 Gbps on RJ45 or more than four 10 Gbps uplinks.

Highlights

  • Layer 2 and Layer 3 switching with auto-sensing PoE+ and PoE++
  • 48 RJ45 ports plus 4 SFP+ ports for 10 Gbps uplinks
  • 600 W PoE budget powers 40 PoE+ and 8 PoE++ devices
  • 3 inch touch LCM for local configuration and monitoring
  • Near-silent cooling suits office and rack environments

Specifications

BrandUbiquiti
ModelUSWPRO48POE
Part NumberUSW-PRO-48-POE
FormatDesktop
Primary Ports48 x RJ45 + 4 x SFP
Primary Port Speed10/100/1000Mbps + 10 Gbps
PoE600W PoE budget
StackableYes
LayerLayer2 and Layer3
Power240 volts,
Temperature, 40 degrees_celsius
FeaturesOther
Package ContentsOther
Shipping weight8.55 kg
Package size667 × 518 × 214 mm

Questions about this item

How do I install the USWPRO48POE in a rack and which step is commonly missed?

Mount the included brackets, secure the switch in the rack, connect the AC power cable to a 100-240V 50/60 Hz supply, then link the SFP+ uplinks and RJ45 devices; the step often missed is confirming the 600W PoE budget matches the total draw of all connected PoE+ and PoE++ devices before powering on.

What maintenance or replacement will the USWPRO48POE need over time?

The internal 660W AC/DC power supply is the only field-replaceable component; the near-silent cooling system has no user-serviceable fans, so maintenance is limited to keeping ventilation clear and replacing the PSU if it fails.

What limit appears first when the USWPRO48POE runs at full load continuously?

The 600W PoE budget is the first hard limit; with forty 802.3at PoE+ ports and eight 802.3bt PoE++ ports, total connected device draw cannot exceed 600W, and the switch will disable ports once that budget is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.