We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rackmount 24-port switch with illuminated RJ45 and SFP+ ports

Ubiquiti Networks

Ubiquiti Networks USW-Pro-Max-24 24-port Layer 3 network switch

SKU CH-B3V7-QJ1YC MPN USW-Pro-Max-24

A managed 24-port Layer 3 switch with 16 GbE and 8 2.5 GbE RJ45 ports plus two 10G SFP+ uplinks, 112 Gbps switching capacity and Etherlighting port indicators

  • FormatRackmount
  • Network Management TypeManaged
  • Primary Ports24 x RJ45 + 2 x SFP+
  • Primary Port SpeedTotal non-blocking throughput 56 Gbps Switching capacity 112
  • Primary Port Type(16) GbE RJ45 ports (8) 1/2.5 GbE RJ45 ports (2) 10G SFP+ po
  • Management InterfaceEthernet In-Band
  • Layer 3 routing and 112 Gbps switching capacity for high-performance networks
  • 24 managed ports including eight 2.5 GbE and two 10G SFP+ uplinks
  • Etherlighting™ LEDs show port location, speed and native VLAN at a glance
  • Redundant power ready with universal AC and USP-RPS DC inputs
  • Advanced Layer 2 features: LACP, STP/RSTP, QoS, IGMP snooping and 802.1X control

Pro Max 24 Layer 3 Switch

The USW-Pro-Max-24 is a 24-port managed rackmount switch that delivers Layer 3 routing and 56 Gbps non-blocking throughput. It provides 16 GbE RJ45 ports, 8 ports at 2.5 GbE, and 2 10G SFP+ uplinks for aggregation. The Etherlighting™ LEDs show port location, speed, and native VLAN status at a glance.

Suits networks needing multi-gig access

Buyers who need PoE to power access points or cameras should look elsewhere, as this model has no PoE support. Environments requiring higher-density 10G connectivity beyond two uplinks will need a different switch. The single universal AC input plus optional USP-RPS DC backup fits standard rack power planning.

2.5 GbE port count decides fit

Eight 2.5 GbE RJ45 ports give multi-gig speed to compatible endpoints without recabling to 10G. If the deployment only needs Gigabit to the desktop, a switch with fewer 2.5 GbE ports may cost less. If more than eight multi-gig drops are required, a model with additional 2.5 GbE or 10G ports is necessary.

Highlights

  • Layer 3 routing and 112 Gbps switching capacity for high-performance networks
  • 24 managed ports including eight 2.5 GbE and two 10G SFP+ uplinks
  • Etherlighting™ LEDs show port location, speed and native VLAN at a glance
  • Redundant power ready with universal AC and USP-RPS DC inputs
  • Advanced Layer 2 features: LACP, STP/RSTP, QoS, IGMP snooping and 802.1X control

Specifications

BrandUbiquiti Networks
SeriesNetwork Switch
ModelPro Max 24
Part NumberUSW-Pro-Max-24
FormatRackmount
Network Management TypeManaged
Primary Ports24 x RJ45 + 2 x SFP+
Primary Port SpeedTotal non-blocking throughput 56 Gbps
Switching capacity 112 Gbps
Forwarding rate 83.328 Mpps
Primary Port Type(16) GbE RJ45 ports
(8) 1/2.5 GbE RJ45 ports
(2) 10G SFP+ ports
Management InterfaceEthernet In-Band
VLAN SupportYes
Jumbo FramesYes
PoENo
Layer3
Layer 2 FeaturesLACP Port Aggregation
STP & RSTP
QoS (DSCP)
Pro AV Profiles (Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron)
Advanced IGMP Configuration (Querier, Fast Leave, Router Port)
IGMP Snooping
802.1X Control
MAC-Based ACLs & Device Isolation
DHCP Snooping & Guarding
Egress Rate Limit
Flow Control
Storm Control
Multicast & Broadcast Rate Limiting
MAC Address Blocking
IP-Based ACLs & Network Isolation
MAC-Based Port Restriction
Port Isolation
Port Mirroring
Jumbo Frames
LLDP-MED
Voice VLAN
Loop Protection
Layer 3 FeaturesDHCP for locally-managed networks
DHCP relay
Inter-VLAN routing between networks on same switch
Static routing between local networks
Network isolation with ACLs
Port MirroringYes
LEDsEthernet
Locating
Speed/link
Native VLAN/network
SFP+
Locating
Speed/link
Native VLAN/network
ButtonFactory reset
Power(1) Universal input, 100—240V AC, 50/60 Hz
(1) USP-RPS DC input
Max Power Consumption50 W
Dimensions442 x 325 x 44 mm (17.4 x 12.8 x 1.7")
WeightWithout mounting brackets: 4.2 kg (9.3 lb)
With mounting brackets: 4.3 kg (9.5 lb)
CertificationCE, FCC, IC
System RequirementUniFi Network Version 8.0.24 and later
Temperature-5 to 40° C (23 to 104° F)
Humidity10 to 90% noncondensing
Shipping weight5.33 kg
Package size521 × 432 × 121 mm

Questions about this item

What rack space and power connection does the USW-Pro-Max-24 need to operate?

The switch is a rackmount unit with a universal 100—240V AC input and a USP-RPS DC backup input.

Can the 2.5 GbE and 10G SFP+ ports link with my existing Gigabit devices?

Yes, the (8) 2.5 GbE RJ45 and (2) 10G SFP+ ports auto-negotiate down to 1 GbE for older hardware.

How do I confirm the switch is passing traffic at line rate after installation?

Check the Etherlighting™ port LEDs for speed/link status and native VLAN colour, then verify 112 Gbps switching capacity in UniFi Network 8.0.24.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.