Ubiquiti Networks
Ubiquiti Networks UniFi UAP-AC-PRO access point Wi-Fi 5
A dual-band wireless access point managed via UniFi Controller, delivering up to 1.7 Gbps over 2.4 GHz and 5 GHz with indoor range up to 100 m and outdoor range up to 400 m
- StandardsIEEE 802.11ac
- Device ManagementUniFi Controller
- Wireless Data RatesUp to 1.7Gbps
- Security64/128-Bit WEP, 802.1x, WPA2-PSK(TKIP,AES)
- Frequency Band2.4 GHz / 5 GHz
- Channels11 Channels
- Combined 1.7Gbps throughput from dual-band 2.4GHz and 5GHz operation
- Centralised control via UniFi Controller software for simplified network management
- Enterprise-grade security with WPA2-PSK and 802.1x authentication
- Indoor coverage up to 100 metres with 20dBm transmit power
- Outdoor reach up to 400 metres using internal antennas
Dual-Band Wireless Access Point
The Ubiquiti UniFi UAP-AC-PRO is a dual-band wireless access point designed for indoor and outdoor deployment. It operates on 2.4 GHz and 5 GHz frequencies and supports IEEE 802.11ac Wave 2 technology. Network administrators manage the device centrally through the UniFi Controller software. This unit suits small businesses and prosumer environments needing unified management.
Sustained Throughput and Coverage
Under continuous load the access point delivers aggregate wireless data rates up to 1.7Gbps across both bands. Internal antennas provide typical transmitted power of 20dBm for consistent signal quality. The operating range reaches up to 100m indoors and up to 400m outdoors depending on environmental conditions. Performance remains stable across 11 available channels during extended sessions.
PoE-Powered RJ-45 Uplink
The single RJ-45 interface carries both data and Power over Ethernet, so no separate power adapter is required. This constraint means the switch or injector must supply compliant PoE power for the unit to function. Buyers without existing PoE infrastructure will need to budget for a compatible injector or switch port. The wired uplink also caps backhaul bandwidth to the port's negotiated speed.
Highlights
- Combined 1.7Gbps throughput from dual-band 2.4GHz and 5GHz operation
- Centralised control via UniFi Controller software for simplified network management
- Enterprise-grade security with WPA2-PSK and 802.1x authentication
- Indoor coverage up to 100 metres with 20dBm transmit power
- Outdoor reach up to 400 metres using internal antennas
Specifications
| Brand | Ubiquiti |
|---|---|
| Series | UniFi |
| Model | UAP-AC-PRO |
| Standards | IEEE 802.11ac |
| Device Management | UniFi Controller |
| Wireless Data Rates | Up to 1.7Gbps |
| Security | 64/128-Bit WEP, 802.1x, WPA2-PSK(TKIP,AES) |
| Frequency Band | 2.4 GHz / 5 GHz |
| Channels | 11 Channels |
| Antenna | Internal Antenna |
| Transmitted Power | 20dBm (Typical) |
| Operating Range | Indoor: Up to 100m, Outdoor: Up to 400m |
| Interface | RJ-45 |
Questions about this item
How much power does the UAP-AC-PRO draw when it runs continuously?
The access point is powered over its RJ-45 port and transmits at a typical 20dBm, so the PoE injector or switch supplies both data and power without a separate adapter.
What network equipment must already be in place for this AP to operate?
A PoE-capable switch or injector and a UniFi Controller (software or Cloud Key) are required to adopt and manage the device.
Will the UAP-AC-PRO work alongside my older 802.11n access points on the same network?
Yes, it supports 2.4 GHz and 5 GHz bands simultaneously and the UniFi Controller manages mixed 802.11ac and 802.11n devices in a single wireless LAN.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



