Ubiquiti Networks
Ubiquiti Networks UniFi U6-IW-US Access Point WiFi 6 In-Wall
A dual-band WiFi 6 wall access point with four GbE ports, one supporting 802.3af PoE output, serving 300+ clients at 5.3 Gbps aggregate throughput
- Dual-band WiFi 6 delivers 5.3 Gbps aggregate throughput
- Four-stream 5 GHz and two-stream 2.4 GHz WiFi 6 bands
- Four GbE RJ45 ports with one 802.3 af PoE output port
- Supports 300+ concurrent client connections
- Bluetooth-powered setup via UniFi Network web or mobile app
In-Wall WiFi 6 Access Point
The Ubiquiti UniFi U6-IW-US mounts inside a standard wall box to deliver dual-band WiFi 6 coverage. It provides four Gigabit Ethernet ports, one of which supplies 802.3af PoE output for a downstream device. Setup is handled through Bluetooth using the UniFi Network web or mobile application.
Suits single-gang installs.
Ideal for homes or offices that want WiFi 6 distributed through existing wall outlets without adding ceiling hardware. The four-port switch and PoE passthrough simplify wiring for a desk phone or second AP. Builders needing ceiling-mount density or outdoor-rated enclosures should consider other form factors.
5.3 Gbps aggregate throughput ceiling
The dual-band radio delivers a combined 5.3 Gbps over-the-air rate using 4x4 MU-MIMO on 5 GHz and 2x2 on 2.4 GHz. This capacity supports 300-plus concurrent clients. If your deployment demands higher aggregate bandwidth or dedicated backhaul radios, this model will not meet that requirement.
Highlights
- Dual-band WiFi 6 delivers 5.3 Gbps aggregate throughput
- Four-stream 5 GHz and two-stream 2.4 GHz WiFi 6 bands
- Four GbE RJ45 ports with one 802.3 af PoE output port
- Supports 300+ concurrent client connections
- Bluetooth-powered setup via UniFi Network web or mobile app
Specifications
No published specifications for this item yet.
Questions about this item
How will the 5.3 Gbps WiFi 6 throughput work with my older phones and laptops?
The U6-IW-US uses 4x4 MU-MIMO on 5 GHz and 2x2 on 2.4 GHz WiFi 6, so older clients still connect and share the 5.3 Gbps aggregate rate across 300+ simultaneous devices.
How do I confirm the 4 GbE ports and PoE output are working after install?
In the UniFi Network app you can see each of the four RJ45 links light up at 1 Gbps and verify that the 802.3 af PoE output port is delivering power to a downstream device.
What comes in the box and what must I buy separately?
The package includes the in-wall access point and mounting hardware; you supply the Ethernet cables for the four GbE ports and a PoE injector or switch if your network does not already provide 802.3 af power.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



