Extreme Networks
Extreme Networks Silhouette Ceiling Mounting Bracket 14 or 18
$23.99
0.0002847BTC
In stock
Ubiquiti Networks
Ubiquiti Networks UniFi nanoHD AC1350 access point
Compact indoor access point supports 200+ users with AC1350 Wi-Fi 5 and 4×4 MU-MIMO, powered by PoE
- ColorWhite
- # of Users200+
- Standards802.11 a/b/g/n/ac/ac-wave2
- WiFi GenerationWi-Fi 5
- Wireless Data RatesAC1350
- SecurityWEP, WPA-PSK, WPA-Enterprise (WPA / WPA2, TKIP / AES), 802.1
- Supports 200+ concurrent users with 4x4 MU-MIMO
- AC1350 Wi-Fi 5 throughput across dual bands
- Compact indoor design covers up to 140 m range
- Powered by 802.3af PoE for single-cable installation
- Centralised management via UniFi Controller software
Compact indoor Wi-Fi 5 access point
The Ubiquiti Networks UniFi nanoHD is a small, low-profile access point built for indoor deployments that need enterprise-grade management without a dedicated hardware controller. It supports 200-plus concurrent users and integrates into the UniFi software ecosystem for centralised configuration across one or thousands of devices.
Gigabit uplink and PoE power limit
The single 10/100/1000 Ethernet port caps wired backhaul at one gigabit per second and draws power through 802.3af PoE, so the AP cannot exceed the power budget of that standard. Wireless throughput is rated at AC1350 using 4x4 MU-MIMO on 802.11ac Wave 2, but the uplink remains the hard ceiling for aggregate client traffic.
AC1350 4x4 MU-MIMO radio
The decisive specification is the AC1350 4x4 MU-MIMO radio, which determines peak spatial-stream capacity and whether the access point matches the density and throughput requirements of the planned installation.
Highlights
- Supports 200+ concurrent users with 4x4 MU-MIMO
- AC1350 Wi-Fi 5 throughput across dual bands
- Compact indoor design covers up to 140 m range
- Powered by 802.3af PoE for single-cable installation
- Centralised management via UniFi Controller software
Specifications
| Brand | Ubiquiti Networks |
|---|---|
| Model | nanoHD |
| Part Number | UAP-NANOHD-US |
| Color | White |
| # of Users | 200+ |
| Standards | 802.11 a/b/g/n/ac/ac-wave2 |
| WiFi Generation | Wi-Fi 5 |
| Wireless Data Rates | AC1350 |
| Security | WEP, WPA-PSK, WPA-Enterprise (WPA / WPA2, TKIP / AES), 802.11 w/PMF |
| Antenna | 2 x Single-Port, Single-Polarity Antennas, 2.8 dBi each 2 x Single-Port, Dual-Polarity Antennas, 3 x dBi each |
| Mounting Location | Indoor |
| Operating Range | Indoor: Up to 140m, Outdoor: Up to 140m |
| Interface | 1 x 10/100/1000 Ethernet Port |
| Buttons | Reset |
| LAN Ports | 5 x 10/100/1000M |
| Power Supply | PoE |
| Certifications | SWX-UAPHDNANO, has_fcc_id |
| Compliance | has_fcc_id, SWX-UAPHDNANO, not_applicable |
| Temperature | Operating Temperature: -10 ~ 70 degree Celsius (14 ~ 158 degree Fahrenheit) |
| Humidity | Operating Humidity: 5% ~ 95% non-condensing |
| Dimensions | 1.29" x 6.30" x 6.30" |
| Weight | 0.66 lb. 0.69 lb. (With Mounting Kits) |
| Features | Four-Stream 802.11ac Wave 2 Technology Supports 200+ Concurrent Users 802.3af PoE Compatibility |
| Disclaimer | has_fcc_id, SWX-UAPHDNANO |
| Shipping weight | 1.02 kg |
| Package size | 203 × 203 × 89 mm |
Questions about this item
Should I pick the nanoHD or a larger UniFi model for a small office?
The nanoHD supports 200+ concurrent users and 4x4 MU-MIMO on Wi-Fi 5, so it handles dense small-office loads while staying compact.
What does the AC1350 rating deliver on a typical laptop?
AC1350 is the combined PHY ceiling across both bands; a 2x2 client will see roughly half that in real throughput under good conditions.
How far will the 1 GbE port and PoE actually carry data and power?
The single 10/100/1000 port is limited to 100 m by the 802.3 Ethernet standard, and 802.3af PoE shares that same distance limit.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
RUCKUS WIRELESS
RUCKUS WIRELESS 10G-SFPP-LR-S SFP+ transceiver module 10 GigE
$233.99
0.00277683BTC
In stock
