We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular SFP transceiver module with single LC port and blue yellow wavelength labels

Ubiquiti Networks

Ubiquiti Networks UF-SM-1G-S SFP transceiver 1.25 Gbps 3 km BiDi

SKU CH-VS4F-BN7XB MPN UF-SM-1G-S

A bidirectional single-mode SFP transceiver delivering 1.25 Gbps over 3 km using one LC simplex port

  • Device TypeTransceiver
  • WavelengthTX Wavelength: Blue 1310 nm, Yellow 1550 nm RX Wavelength: B
  • Fiber CableSingle-mode Optical Fiber
  • ProtocolsTCP/IP
  • Ports1 x LC
  • Max Distance3 km
  • 25 Gbps throughput for gigabit links
  • BiDirectional optics halve fibre count
  • 3 km reach on single-mode fibre
  • TX 1310 nm / RX 1550 nm wavelength pair
  • Single LC simplex port for simple patching

Single-mode BiDi transceiver

The UF-SM-1G-S is a 1.25 Gbps SFP module designed for single-mode fiber links up to 3 km. It suits network operators extending Gigabit Ethernet between sites where only one fiber strand is available. The bidirectional wavelength pair carries both transmit and receive traffic on a single core, simplifying infrastructure planning.

LC simplex connector and wavelength pairing

A single LC simplex port accepts the fiber patch cord and handles both directions through the blue 1310 nm / yellow 1550 nm wavelength split. TX emits at 1310 nm and receives at 1550 nm on the blue side, while the yellow side reverses the pair. This arrangement removes the need for a second fiber run and keeps patch-panel density high.

No extra accessories required

The module ships ready to install in any compatible SFP cage; no separate cables, adapters or configuration software are bundled. Network teams simply pair it with a matching BiDi unit at the far end and connect the single-mode patch cord. Power and monitoring are handled entirely by the host switch or router.

Highlights

  • 25 Gbps throughput for gigabit links
  • BiDirectional optics halve fibre count
  • 3 km reach on single-mode fibre
  • TX 1310 nm / RX 1550 nm wavelength pair
  • Single LC simplex port for simple patching

Specifications

BrandUbiquiti Networks
ModelUF-SM-1G-S-US
Device TypeTransceiver
WavelengthTX Wavelength: Blue 1310 nm, Yellow 1550 nm
RX Wavelength: Blue 1550 nm, Yellow 1310 nm
Fiber CableSingle-mode Optical Fiber
ProtocolsTCP/IP
Ports1 x LC
Max Distance3 km
Transfer Rate1.25 Gbps SFP
Weight0.15
Shipping weight0.06 kg
Package size104 × 74 × 23 mm

Questions about this item

What transfer rate does the 1.25 Gbps SFP interface actually deliver?

The transceiver runs at 1.25 Gbps SFP, providing a 1 Gbps Gigabit Ethernet link over single-mode fiber.

What physical connector and fiber type are required to install the UF-SM-1G-S module?

It uses a single LC simplex port and must be paired with single-mode optical fiber using Blue 1310 nm / Yellow 1550 nm wavelength alignment.

How is the BiDi module installed, and what alignment mistake causes link failure?

Insert the SFP into a compatible SFP port, then connect the LC simplex patch cord matching the Blue TX 1310 nm side to the Yellow RX 1310 nm side on the far end; reversing the Blue/Yellow pair breaks the bidirectional link.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.