We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small square white access point with low-profile dome, ceiling-mount design

Ubiquiti Networks

Ubiquiti Networks UAP-NANOHD access point

SKU CH-K4Z5-ZE2KS

A compact dual-band wireless access point supporting over 200 concurrent users with 802.11ac Wave 2 MU-MIMO and 802.3af PoE power

  • Standards802.11 a/b/g/n/r/k/v/ac/ac-wave2
  • SecurityWEP, WPA-PSK, WPA-Enterprise (WPA / WPA2, TKIP / AES), 802.1
  • Antenna2 x Single-Port, Single-Polarity Antennas, 2.8 dBi each 2 x
  • Interface1 x 10/100/1000 Ethernet Port
  • ButtonsReset
  • Bluetoothwireless
  • Handles 200+ users with 4x4 Wave 2 MU-MIMO
  • Runs on 802.3af PoE without extra power gear
  • Compact 6.30" square fits tight spaces cleanly
  • Dual-band 300 + 1733 Mbps for heavy traffic
  • Operates -10 to 70 °C in humid sites

Enterprise Wireless AP

The Ubiquiti Networks UAP-NANOHD is an enterprise-class indoor wireless access point built for high-density environments. It delivers simultaneous dual-band operation with speeds up to 300 Mbps on 2.4 GHz and 1733 Mbps on 5 GHz using 4x4 Wave 2 MU-MIMO technology. The unit draws a maximum of 10.5 W and is powered entirely through 802.3af PoE.

High-density indoor deployments

This access point suits offices, schools and venues that need to support 200 or more concurrent users from a compact ceiling-mounted device. Its low-profile 16 mm design blends into finished spaces and operates reliably from -10 to 70 degrees Celsius. Installations that require 802.3at PoE+ budgets or outdoor-rated enclosures should consider alternative hardware.

802.3af PoE power requirement

The UAP-NANOHD accepts only 802.3af Power over Ethernet delivered on a single 10/100/1000 Ethernet port within a 44 to 57 V DC range. A compatible UniFi switch or standards-based PoE injector is mandatory; the unit ships without a separate power adapter. Verify that your existing cabling and PoE source meet this specification before purchase.

Highlights

  • Handles 200+ users with 4x4 Wave 2 MU-MIMO
  • Runs on 802.3af PoE without extra power gear
  • Compact 6.30" square fits tight spaces cleanly
  • Dual-band 300 + 1733 Mbps for heavy traffic
  • Operates -10 to 70 °C in humid sites

Specifications

BrandUbiquiti Networks
ModelUAP-NANOHD
Part NumberUAP-NANOHD
Standards802.11 a/b/g/n/r/k/v/ac/ac-wave2
SecurityWEP, WPA-PSK, WPA-Enterprise (WPA / WPA2, TKIP / AES), 802.11 w/ PMF
Antenna2 x Single-Port, Single-Polarity Antennas, 2.8 dBi each
2 x Single-Port, Dual-Polarity Antennas, 3 dBi each
Interface1 x 10/100/1000 Ethernet Port
ButtonsReset
Bluetoothwireless
Power SupplyPower Method: 802.3af PoE
Power Supply: UniFi Switch (PoE)
Power Save: Supported
Beamforming: Supported
Maximum Power Consumption: 10.5W
Supported Voltage Range : 44 to 57V DC
Compliancenot_applicable
TemperatureOperating Temperature: -10 ~ 70 degree Celsius (14 ~ 158 degree Fahrenheit)
HumidityOperating Humidity: 5% ~ 95% non-condensing
Dimensions6.30" x 6.30" x 1.29"
Weight0.66 lb.
0.69 lb. (With Mounting Kits)
FeaturesFour-Stream 802.11ac Wave 2 Technology
Supports 200+ Concurrent Users
802.3af PoE Compatibility
DisclaimerSouth Bruce Peninsula , ON N0H 2T0, CA

Questions about this item

Will the 802.3af PoE injector or switch port need replacement over time?

The access point draws up to 10.5W from any 802.3af PoE source. Standard PoE injectors and switch ports are solid-state with no moving parts and typically outlast the AP itself.

What limits throughput first during continuous high-density use?

The single 10/100/1000 Ethernet uplink caps aggregate traffic at 1 Gbit/s while the radios can deliver 300 Mbps on 2.4 GHz and 1733 Mbps on 5 GHz combined.

How much heat does the UAP-NANOHD add to a ceiling cavity when powered all day?

Maximum power consumption is 10.5W, all of which becomes heat. Operating temperature range is -10 °C to 70 °C, so normal indoor ambient conditions stay well within limits.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.