We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White square ceiling access point with LED indicator

Ubiquiti Networks

Ubiquiti Networks UAP-AC-SHD 802.11ac Wave 2 access point

SKU CH-S9TN-G0WQY

802.11ac Wave 2 access point with 4×4 MU-MIMO delivering 2533 Mbps combined throughput, dedicated hardware offload for QoS and guest control, and a built-in WIPS security radio

  • 11ac Wave 2 MU-MIMO communicates with multiple clients simultaneously for higher multi-user throughput
  • Independent 2.4 GHz and 5 GHz hardware offload maximizes throughput and reduces latency
  • Dedicated hardware offload handles QoS, guest control and client management efficiently
  • Optimised antenna system with beamforming uses multiple antennas to increase throughput and range
  • Dedicated WIPS security radio and processor provides real-time interference analysis and network protection

Ubiquiti UniFi AC SHD Access Point

The Ubiquiti UniFi AC SHD is a Wave 2 wireless access point built for high-density environments. It delivers 4x4 MU-MIMO capability and a 2533 Mbps aggregate rate across dual bands. Integrated mounting kits allow clean wall or ceiling installation. The unit is managed through the UniFi controller for centralized network oversight.

Suited for dense deployments needing multi-user

This AP fits offices, schools, or venues where many clients connect simultaneously and Wave 2 MU-MIMO efficiency matters. The dedicated security radio adds real-time spectrum analysis and wireless intrusion prevention. Buyers who require higher aggregate throughput or newer protocol efficiencies should look elsewhere, as this model tops out at the Wave 2 ceiling.

2533 Mbps aggregate throughput ceiling

The 2533 Mbps figure represents the maximum combined data rate across 2.4 GHz and 5 GHz radios using 4x4 MU-MIMO. If your client mix or application demand exceeds this bandwidth envelope, a higher-class access point will be necessary. Confirm that your PoE infrastructure and controller version support the SHD feature set before deployment.

Highlights

  • 11ac Wave 2 MU-MIMO communicates with multiple clients simultaneously for higher multi-user throughput
  • Independent 2.4 GHz and 5 GHz hardware offload maximizes throughput and reduces latency
  • Dedicated hardware offload handles QoS, guest control and client management efficiently
  • Optimised antenna system with beamforming uses multiple antennas to increase throughput and range
  • Dedicated WIPS security radio and processor provides real-time interference analysis and network protection

Specifications

No published specifications for this item yet.

Questions about this item

How does the 2533 Mbps headline rate translate when the AP is mounted in a real office?

The 2533 Mbps figure represents the combined physical-layer capacity across both radios; actual throughput per client will be lower and depends on channel width, spatial streams supported by the client, and local interference.

What does the 802.11ac Wave 2 interface cap in practice?

Wave 2 adds 4x4 MU-MIMO so the AP can serve up to four compatible clients simultaneously on the 5 GHz band, raising multi-user throughput compared with single-user Wave 1 gear.

What does the AP need to fit or mount on a ceiling or wall?

Mounting kits are included in the box, allowing direct surface attachment to standard ceiling tiles or drywall without extra hardware.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.