Ubiquiti Networks
Ubiquiti Networks UAP-AC-SHD-5 5-Pack access point
Five ceiling or wall-mountable 802.11ac Wave 2 access points with a dedicated security radio, dual-band 2.40 and 5 GHz operation, 2.10 Gbit/s speed, MU-MIMO, beamforming.
- Centralised management via UniFi Network Controller
- 10 Gbit/s aggregate wireless throughput
- Dual-band 2.40 GHz and 5 GHz operation
- Two Gigabit Ethernet ports with PoE support
- Ceiling or wall mountable, 8.7 diameter × 1.9 height
Five-pack UniFi AC SHD access points
This five-pack supplies ceiling-mountable and wall-mountable UniFi AC SHD units for multi-room deployments. Each unit is managed through the UniFi Network Controller for central configuration, monitoring and remote firmware upgrades. Integrated guest portal and hotspot features simplify visitor access. The pack suits installers and IT teams expanding coverage across a site.
Gigabit Ethernet backhaul and dual-band radio limits
Each access point connects via two Gigabit RJ-45 ports, capping wired throughput at 1 Gbit/s per link. The dual-band radio operates on 2.40 GHz and 5 GHz using the IEEE 802.11 ac standard with a maximum wireless transmission speed of 2.10 Gbit/s. Real-world throughput will be lower due to channel width, client capability and environmental interference.
Dedicated security radio for continuous scanning
The defining specification is the dedicated security radio that runs alongside the client-serving radios. It enables persistent spectrum scanning and threat detection without reducing client bandwidth. Buyers who do not need continuous security monitoring or who require a higher wireless standard should evaluate other models.
Highlights
- Centralised management via UniFi Network Controller
- 10 Gbit/s aggregate wireless throughput
- Dual-band 2.40 GHz and 5 GHz operation
- Two Gigabit Ethernet ports with PoE support
- Ceiling or wall mountable, 8.7 diameter × 1.9 height
Specifications
| Brand | Ubiquiti Networks |
|---|
Questions about this item
How many access points are included in the UAP-AC-SHD-5 pack?
The pack contains five identical UniFi AC SHD access points, each ceiling- or wall-mountable and weighing 1.54 lb.
What does the 2.10 Gbit/s wireless transmission speed mean for my network?
That figure is the combined PHY rate across the 2.40 GHz and 5 GHz radios using 802.11ac Wave 2 with MIMO and beamforming; real-world throughput will be lower due to overhead, interference and client capabilities.
What wired uplink does each unit provide and what speed does it cap at?
Each access point has two Gigabit RJ-45 ports and supports PoE PD, so the wired backhaul is limited to 1 Gbit/s per port.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



