We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Ubiquiti Networks

Ubiquiti Networks UAP-AC-HD-5-US 5-pack access point

SKU CH-6WQN-G7NV8 MPN UAP-AC-HD-5-US

A five-pack of enterprise 802.11ac Wave 2 access points with 4x4 MU-MIMO, dual-band operation and 2.53 Gbps throughput for high-density deployments

  • Standards802.11 a/b/g/n/ac/ac-wave2
  • SecurityWEP, WPA-PSK, WPA-Enterprise (WPA / WPA2, TKIP / AES) 802.11
  • Antenna(2) Dual-Port, Dual-Polarity Antennas, 3 dBi each (2) Dual-P
  • Interface2 x 10/100/1000 Ethernet Ports
  • ButtonsReset
  • Power SupplyPower Method: Passive Power over Ethernet (48V), 802.3at PoE
  • Supports 500+ simultaneous client connections with MU-MIMO technology
  • Four-stream 802.11ac Wave 2 delivers 2.53 Gbps aggregate throughput
  • Dual-band 4x4 Multi-User MIMO serves multiple devices at once
  • Two gigabit Ethernet ports provide wired backbone flexibility
  • 3at PoE+ and passive 48 V PoE simplify installation

Five-pack enterprise access point

The Ubiquiti Networks UAP-AC-HD-5-US supplies five 802.11ac Wave 2 access points built for high-density environments such as venues, campuses or open-plan offices. Each unit delivers simultaneous dual-band 4x4 MU-MIMO operation and supports 500-plus concurrent client connections. Management is handled through the UniFi Controller software for a single unified network view.

Sustained high-density throughput

Four-stream 802.11ac Wave 2 technology provides a combined 2.53 Gbps radio rate while serving many clients at once rather than in short bursts. The dual-polarity antennas rated at 3 dBi and 4 dBi maintain consistent coverage under heavy load. Passive 48 V PoE and 802.3at PoE+ keep power delivery stable with a maximum draw of 17 W per unit across the operating range of -10 to 70 °C.

Ceiling mount with PoE cabling

Installation uses the integrated omni antennas and a single Ethernet cable carrying both data and power, so no separate mains wiring is required. Two gigabit Ethernet ports allow a wired uplink and a downstream device if needed. The reset button is recessed; a paper clip or similar tool is required to trigger a factory reset without damaging the housing.

Highlights

  • Supports 500+ simultaneous client connections with MU-MIMO technology
  • Four-stream 802.11ac Wave 2 delivers 2.53 Gbps aggregate throughput
  • Dual-band 4x4 Multi-User MIMO serves multiple devices at once
  • Two gigabit Ethernet ports provide wired backbone flexibility
  • 3at PoE+ and passive 48 V PoE simplify installation

Specifications

BrandUbiquiti Networks
ModelUAP-AC-HD-5-US
Standards802.11 a/b/g/n/ac/ac-wave2
SecurityWEP, WPA-PSK, WPA-Enterprise (WPA / WPA2, TKIP / AES) 802.11 w/ PMF
Antenna(2) Dual-Port, Dual-Polarity Antennas, 3 dBi each
(2) Dual-Port, Dual-Polarity Antennas, 4 dBi each
Interface2 x 10/100/1000 Ethernet Ports
ButtonsReset
Power SupplyPower Method: Passive Power over Ethernet (48V), 802.3at PoE+ Supported
Power Supply: 48V, 0.5A PoE Gigabit Adapter
Maximum Power Consumption: 17W
TemperatureOperating Temperature: -10 ~ 70 degree Celsius (14 ~ 158 degree Fahrenheit)
Humidity5 to 95% Noncondensing
Dimensions1.89" x 8.66" x 8.66"
Weight1.54 lbs.
FeaturesSimultaneous Dual-Band 4x4 Multi-User MIMO
Four-Stream 802.11AC Wave 2 Technology
802.3at Poe+ Compatibility
2 x 10/100/1000 Ethernet Ports
UniFi Controller Software
Integrated Omni Antennas
Guest Portal / Hotspot Support
Passive Power over Ethernet
500+ Concurrent Clients
Reset Button
CE, FCC, IC Certified
Shipping weight5.48 kg
Package size290 × 259 × 251 mm

Questions about this item

How much power does the UAP-AC-HD draw when it runs continuously?

Maximum power consumption is 17W supplied through 48V passive PoE or 802.3at PoE+.

What cabling and power gear must I already have to install one of these access points?

You need a Cat5e or better Ethernet run to each unit and a 48V 0.5A PoE injector or an 802.3at PoE+ switch port.

Will the dual Gigabit ports negotiate down to 100 Mbps on my older switches?

Yes, the two 10/100/1000 ports auto-negotiate so they work with 100 Mbps infrastructure.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.