We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two small SFP transceiver modules with LC connectors in a clear bag

Ubiquiti Networks

Ubiquiti Networks UACC-OM-MM-1G-D 1.25 Gbps Multi-Mode SFP Transceiver 2-Pack

SKU CH-566H-7VZD9

A pair of 1.25 Gbps SFP transceivers for multi-mode fibre links up to 550 metres

  • Device TypeTransceiver
  • Ready for 1.25 Gbps links with 1.25 Gbps SFP data rate
  • Extends connections up to 550 meters over multimode fiber
  • Dual LC connectors simplify patching with (2) LC interfaces
  • Two modules in one pack give immediate spare or second link
  • Listed by manufacturer in 2023 as a current transceiver

Two-Pack 1.25 Gbps SFP Modules

This two-pack supplies Ubiquiti Networks 1.25 Gbps SFP transceivers built for multimode fiber links. Each module uses dual LC connectors and is rated for cable runs up to 550 meters. The pair suits network operators who need matching spares or parallel uplinks.

Upgrade from Single Units or Lower Speeds

Replacing individual transceivers with this matched pair simplifies inventory and ensures identical performance on both ends of a link. The step up from slower optics is worthwhile when 1.25 Gbps throughput and 550-meter reach match the design requirements.

Check Switch Ports and Fiber Type

Verify that the host equipment accepts SFP form-factor modules at 1.25 Gbps and provides LC receptacles. Confirm the installed cabling is multimode fiber compatible with the 550-meter distance rating before ordering.

Highlights

  • Ready for 1.25 Gbps links with 1.25 Gbps SFP data rate
  • Extends connections up to 550 meters over multimode fiber
  • Dual LC connectors simplify patching with (2) LC interfaces
  • Two modules in one pack give immediate spare or second link
  • Listed by manufacturer in 2023 as a current transceiver

Specifications

Device TypeTransceiver

Questions about this item

What type of fiber connector does the UACC-OM-MM-1G-D transceiver use for multimode fiber?

Each module in the two-pack uses a standard LC duplex connector designed for multimode fiber patch cables.

What is the correct insertion method for these SFP transceivers into a switch port?

Slide the module firmly into the SFP slot until the latch clicks audibly; forcing it without aligning the key damages the connector.

When should the optical interfaces be cleaned to maintain the 550-meter link?

Clean the LC ferrules with a lint-free wipe and isopropyl alcohol before first installation and any time the link shows unexpected signal loss.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.