Ubiquiti Networks
Ubiquiti Networks UACC-CABLE-DOORLOCKRELAY-1P Door Lock Relay Cable 1-Pair 152.4 m
A bulk door-lock relay cable with 18 AWG solid conductors, SRPVC insulation and TPE jacket rated for –45 °C to 65 °C, supplied in a 152.4 m length
- TypeComputer Accessories
- Weight6.0000
- Reliable signal transmission with 18 AWG solid conductors
- Durable in extreme cold down to -45°C operating temperature
- Withstands high heat up to 65°C for tough environments
- Fire-safe design meeting VW-1 safety standards
- Ample 152.4 m length for large-scale installations
Door Lock Relay Cable 152.4 m
The Ubiquiti bulk cable is a 1-pair relay cable supplied in a 152.4 m length. It uses 18 AWG solid conductors for signal transmission to door lock mechanisms. Installers and integrators working on access-control projects will find the continuous reel convenient for custom run lengths.
Sustained signal transmission
The solid 18 AWG conductors maintain consistent conductivity over long pulls without the resistance drift seen in stranded alternatives. Semi-rigid PVC insulation and a thermoplastic elastomer jacket protect the conductors across an operating range of -45 °C to 65 °C. VW-1 compliance confirms the materials meet vertical flame-test requirements for permanent installations.
Build quality and daily handling
The SRPVC insulation resists abrasion while the TPE jacket remains flexible in cold weather, easing pulls through conduit and cable trays. At 6.0000 kg the reel is manageable for a single technician to transport and unspool on site. The 1-pair construction limits use to single-door relay circuits; projects requiring multiple independent circuits will need additional cable runs.
Highlights
- Reliable signal transmission with 18 AWG solid conductors
- Durable in extreme cold down to -45°C operating temperature
- Withstands high heat up to 65°C for tough environments
- Fire-safe design meeting VW-1 safety standards
- Ample 152.4 m length for large-scale installations
Specifications
| Brand | Ubiquiti |
|---|---|
| Model | UACC-CABLE-DOORLOCKRELAY-1P |
| Type | Computer Accessories |
| Weight | 6.0000 |
| Shipping weight | 6.00 kg |
| Package size | 368 × 339 × 183 mm |
Questions about this item
Does the 18 AWG solid-conductor cable generate noticeable heat or draw extra power when run continuously?
The cable is a passive 18 AWG solid-conductor type with SRPVC insulation and TPE jacket; it carries only the low-voltage relay signal and produces no measurable heat or power draw of its own.
What Ubiquiti door-access controller or relay module must I already own for this 152.4 m bulk cable to function?
This bulk cable is designed to connect Ubiquiti door-lock relay modules to the lock hardware; you need a compatible Ubiquiti access-control controller or relay unit that accepts a 1-pair 18 AWG cable.
Can I splice this 18 AWG SRPVC/TPE jacketed cable onto the thinner pigtail wires on my existing door strike without signal loss?
Yes — the solid 18 AWG conductors and VW-1 rated insulation are intended for direct termination or splicing to standard strike pigtails, and the -45 °C to 65 °C temperature rating matches typical legacy installations.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
