We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Ubiquiti SFP+ direct attach copper cable, 0.5 m

Ubiquiti Networks

Ubiquiti Networks RNAB0BCPJQGSQ SFP+ direct attach copper cable 10 Gbps 0.5 m

SKU CH-CK0M-97A5T MPN RNAB0BCPJQGSQ

Connects SFP+ ports at 10 Gbps over 0.5 m copper with a 0 to 70 °C operating range

  • Device TypeTransceiver
  • Form FactorSFP+
  • Network MediaCopper
  • ConnectorsSFP+ to SFP+ connector
  • Transfer Rate10 Gbps
  • Temperature0 to 70°C (32 to 158°F)
  • 10 Gbps transfer rate for high-speed links
  • 5 m length keeps rack cabling tidy
  • SFP+ to SFP+ connectors ensure direct compatibility
  • Copper media provides cost-effective short runs
  • Operates from 0 to 70 °C for standard environments

Ubiquiti SFP+ 10 Gbps copper cable

This 0.5 metre direct attach copper cable connects two SFP+ ports at 10 Gbps. It is built for short rack or patch-panel links between switches, servers or storage arrays. The passive copper construction keeps latency low and power draw minimal. Buyers needing longer runs or fibre media should look elsewhere.

Capacity and headroom

Rated for 10 Gbps throughput, the cable handles typical 10 Gigabit Ethernet or direct-attach storage traffic without bottleneck. The half-metre length suits adjacent devices in the same rack but offers no slack for wider spacing. Operating temperature spans 0 to 70 °C (32 to 158 °F), covering standard data-centre environments.

Build integration

Both ends terminate in SFP+ connectors, so the link requires matching SFP+ cages on each device — no transceivers needed. The passive design draws no extra power and adds no active components to the signal path. Installers gain a simple, hot-pluggable copper link that frees up transceiver slots for other media.

Highlights

  • 10 Gbps transfer rate for high-speed links
  • 5 m length keeps rack cabling tidy
  • SFP+ to SFP+ connectors ensure direct compatibility
  • Copper media provides cost-effective short runs
  • Operates from 0 to 70 °C for standard environments

Specifications

BrandUbiquiti Networks
Modeluacc-dac-sfp10-05m
Device TypeTransceiver
Form FactorSFP+
Network MediaCopper
ConnectorsSFP+ to SFP+ connector
Transfer Rate10 Gbps
Temperature0 to 70°C (32 to 158°F)
Shipping weight0.07 kg
Package size250 × 24 × 4 mm

Questions about this item

Will the 0.5 m SFP+ cable reach between adjacent rack-mounted switches that have older SFP+ ports?

The 0.5 m length connects neighbouring SFP+ ports on 10 Gbps equipment; it is a passive copper link so any standards-compliant SFP+ port will recognise it without configuration.

How can I confirm the link is running at the full 10 Gbps after I plug it in?

Check the switch port status LEDs or the management interface — both ends should report a 10 Gbps link with no errors once the cable is seated.

Does the package include only the cable or are transceivers supplied as well?

The cable has SFP+ connectors permanently moulded on each end, so no separate transceivers are needed; the box contains the single 0.5 m direct-attach assembly.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.