Extreme Networks
Extreme Networks Silhouette Ceiling Mounting Bracket 14 or 18
$23.99
0.0002858BTC
In stock
Ubiquiti Networks
Ubiquiti Networks NBM365 NanoBridge M 3.65 GHz access point
3.65 GHz directional wireless bridge with integrated radio, 21.5–22.5 dBi gain and dual 10/100 Ethernet ports for links up to 50 km
- AntennaDirective antenna
- Interface2 x 10/100 Ethernet Ports
- LEDs(1) Power, (2) LAN, (4) WLAN
- TemperatureOperating Temperature: -30 to 75° C
- HumidityOperating Humidity: 5 to 95% Non-Condensing
- Dimensions27.76" x 19.37" x 17.32"
- Long-range links up to 50+ km with directive antenna
- High throughput up to 100+ Mbps via InnerFeed technology
- Robust outdoor operation from -30 to 75° C
- Dedicated 3.65 - 3.675 GHz band with 21.5 - 22.5 dBi gain
- Two 10/100 Ethernet ports for flexible wired connectivity
Long-range 3.65 GHz wireless bridge
The NanoBridge M operates at 3.65 to 3.675 GHz with a directive antenna delivering 21.5 to 22.5 dBi gain. It is built for point-to-point links of 50-plus kilometres and up to 100 Mbps real outdoor throughput. The integrated InnerFeed design places the radio in the feedhorn to remove cable loss. Installers needing licensed-band performance for ISP backhaul or campus connectivity will use this unit.
Thermals noise and power draw
The radio runs on an Atheros MIPS 24KC processor at 400 MHz with 32 MB SDRAM and 24 MB flash. It operates from minus 30 to 75 °C in humidity of 5 to 95 percent non-condensing. Passive cooling and the all-in-one enclosure keep noise absent while maintaining stable output across the temperature range. Power is supplied over the Ethernet ports so no separate adapter is required at the mast.
Pole-mount build and dual Ethernet
The pole-mount kit secures the 27.76 by 19.37 by 17.32 inch dish weighing 10.27 lbs to standard masts. Two 10/100 Ethernet ports allow a wired uplink and a local device or PoE passthrough. LEDs show power, LAN link and four WLAN signal levels for quick alignment. The form factor suits rooftop or tower mounting where a compact directive unit is preferred over a larger dish.
Highlights
- Long-range links up to 50+ km with directive antenna
- High throughput up to 100+ Mbps via InnerFeed technology
- Robust outdoor operation from -30 to 75° C
- Dedicated 3.65 - 3.675 GHz band with 21.5 - 22.5 dBi gain
- Two 10/100 Ethernet ports for flexible wired connectivity
Specifications
| Brand | Ubiquiti Networks |
|---|---|
| Series | NanoBridge M |
| Model | NBM365 |
| Antenna | Directive antenna |
| Interface | 2 x 10/100 Ethernet Ports |
| LEDs | (1) Power, (2) LAN, (4) WLAN |
| Temperature | Operating Temperature: -30 to 75° C |
| Humidity | Operating Humidity: 5 to 95% Non-Condensing |
| Dimensions | 27.76" x 19.37" x 17.32" |
| Weight | 10.27lbs |
| Features | The NanoBridge M combines great throughput, noise immunity, and a highly directive antenna for hi-performance CPE applications. Frequency: 3.65 - 3.675 GHz Gain: 21.5 - 22.5 dBi Atheros MIPS 24KC, 400 MHz 32 MB SDRAM, 8 MB Flash Power: 24V, 0.5A PoE Passive PoE (Pairs 4, 5+; 7, 8 Return) 8 W Max Power Consumption |
Questions about this item
How do I mount the NanoBridge M 3.65 GHz on a pole and align the 21.5-22.5 dBi directive antenna?
Use the included pole-mount kit to secure the unit, then aim the integrated feedhorn antenna using the four WLAN signal LEDs for precise alignment.
Which parts of the NBM365 may need replacement after long outdoor exposure?
The Ethernet port seals and pole-mount hardware are the primary items to inspect and replace if corrosion appears.
At what temperature does the radio throttle performance during sustained high-throughput links?
The unit is rated for continuous operation up to 75 °C; sustained loads near that limit will trigger thermal protection.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
RUCKUS WIRELESS
RUCKUS WIRELESS 10G-SFPP-LR-S SFP+ transceiver module 10 GigE
$233.99
0.00278755BTC
In stock
