Ubiquiti Networks
Ubiquiti Networks NBE-2AC-13-US NanoBeam AC 2.4GHz 13dBi network antenna
A 2.4 GHz customer premises radio with a 13 dBi antenna delivers 330+ Mbps throughput over distances up to 15 km and includes a dedicated Wi-Fi management radio for mobile setup
- 4 GHz band gives reliable long-range links up to 15 km
- 13 dBi antenna gain focuses signal for stronger connections
- 330+ Mbps throughput supports high-bandwidth applications
- Dedicated Wi-Fi radio enables quick setup from a mobile device
- Ball-joint mount allows precise aiming on pole, wall or window
Compact 13 dBi bridge for 2.4 GHz links
The Ubiquiti NanoBeam AC NBE-2AC-13-US is a 2.4 GHz airMAX ac CPE with a 13 dBi integrated antenna and a dedicated Wi-Fi management radio. It delivers 330+ Mbps maximum throughput and is rated for links up to 15+ km. The ball-joint mount allows pole, wall or window installation for quick alignment in outdoor deployments.
Suits point-to-point and point-to-multipoint CPE
Installers who need a self-contained 2.4 GHz subscriber unit with built-in aiming and a separate setup radio will find it fits. Buyers who require 5 GHz operation, higher antenna gain for longer paths or a different form factor should look at other models. The integrated Wi-Fi radio is for local configuration only, not for client access.
The 13 dBi gain at 2.4 GHz decides fit
This single figure determines whether the link budget closes over the intended distance and whether the beam-width matches the aiming tolerance on site. If the path needs more gain or a different frequency band, this unit will not meet the requirement.
Highlights
- 4 GHz band gives reliable long-range links up to 15 km
- 13 dBi antenna gain focuses signal for stronger connections
- 330+ Mbps throughput supports high-bandwidth applications
- Dedicated Wi-Fi radio enables quick setup from a mobile device
- Ball-joint mount allows precise aiming on pole, wall or window
Specifications
No published specifications for this item yet.
Questions about this item
Will the NanoBeam AC 2.4GHz 13dBi CPE link with my existing airMAX equipment on the same frequency?
Yes, it runs the airMAX ac protocol on 2.4 GHz so it can bridge to other airMAX AC devices using the same channel plan.
How do I confirm the 330+ Mbps throughput is actually being reached after installation?
Use the built-in Wi-Fi management radio to connect a phone, open the airOS link test, and watch the real-time TX/RX rate and signal-to-noise figures.
Does the box include the pole-mount hardware or do I need to buy a separate bracket?
The package supplies a ball-joint mount that clamps to a pole, wall or window frame; no extra bracket is required for standard installations.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
