We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small white rectangular outdoor switch with four Ethernet ports

Ubiquiti Networks

Ubiquiti Networks NanoSwitch N-SW 4-port Gigabit PoE network switch

SKU CH-G0Z5-DHX1A

A four-port Gigabit switch with one PoE input and three PoE outputs in a weather-resistant enclosure for outdoor use

  • Network Management TypeManaged
  • Primary Ports4 x RJ45
  • Primary Port Speed10/100/1000Mbps
  • ProtocolsTCP/IP
  • PoEYes
  • Layer2
  • Managed Layer 2 switch for controlled traffic
  • 4 Gigabit RJ45 ports deliver 1000Mbps throughput
  • 24V passive PoE in powers the unit
  • Three 24V passive PoE out ports supply devices
  • Weather-resistant enclosure operates from -30 to 70°C

Outdoor Gigabit PoE switch

The Ubiquiti NanoSwitch N-SW is a managed Layer 2 switch with four RJ45 ports operating at 10/100/1000Mbps. It accepts passive 24V PoE input on one port and delivers passive 24V PoE output on three ports, each limited to 1A. The enclosure is weather-resistant and rated for -30 to 70 degree Celsius operation. Typical power draw is 1.5W.

Installers needing passive 24V PoE distribution

This switch suits deployments that already use 24V passive PoE equipment and need to power up to three remote devices such as cameras or radios from a single uplink. It does not suit installations that require active PoE negotiation, standard PoE voltages, or more than three powered ports.

24V passive PoE power budget

Total passive PoE output is capped at 24W shared across the three output ports at 24V and 1A per port. The single input port must supply enough power for the switch itself plus all connected PoE devices. If the connected load exceeds this budget, devices will not receive adequate power.

Highlights

  • Managed Layer 2 switch for controlled traffic
  • 4 Gigabit RJ45 ports deliver 1000Mbps throughput
  • 24V passive PoE in powers the unit
  • Three 24V passive PoE out ports supply devices
  • Weather-resistant enclosure operates from -30 to 70°C

Specifications

BrandUbiquiti Networks
ModelNanoSwitch
Part NumberN-SW
Network Management TypeManaged
Primary Ports4 x RJ45
Primary Port Speed10/100/1000Mbps
ProtocolsTCP/IP
PoEYes
Layer2
LEDsSpeed / Link / Activity (All Ports)
PowerTypical Power Consumption: 1.5W
Passive PoE Max. Wattage per Port: 24V, 2-Pair, 1A per Port (24W)
Total Passive PoE Max. Wattage: 24V, 2-Pair, 1A for 3 Ports (24W)
Power Method: Passive 24V, 2-Pair PoE In
Power Supply: POE-24-24W PoE Adapter (Not Included)
Passive PoE Voltage Range: 21.6 - 26.4V
Dimensions1.28" x 7.73" x 3.68"
Weight0.60 lb.
TemperatureOperating Temperature: -30 ~ 70 degree Celsius (-22 ~ 158 degree Fahrenheit)
HumidityOperating Humidity: 5% ~ 95% non-condensing
Shipping weight0.55 kg
Package size239 × 130 × 64 mm

Questions about this item

Do I need a 24 V passive PoE injector or upstream switch to power the NanoSwitch?

Yes — the unit receives power through its single 24 V passive PoE in port, so a compatible 24 V passive PoE source is required.

Can I connect older 10/100 Mbps devices to the three PoE out ports without slowing the gigabit uplink?

Each port auto-negotiates at 10/100/1000 Mbps, so legacy 10/100 gear will link at its own speed while the uplink remains at gigabit.

Which LEDs should be lit on each port to confirm a healthy gigabit PoE link after installation?

The Speed/Link/Activity LED on each port shows solid for link, blinking for traffic, and the colour indicates negotiated speed — verify all three out ports show gigabit link and activity.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.