We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular network device with SFP, Ethernet and terminal block ports

Ubiquiti Networks

Ubiquiti Networks F-POE-G2 wireless accessory

SKU CH-9MZ7-NGF3H MPN F-POE-G2

Converts fibre to 24 V or 50 V passive PoE for outdoor devices with enhanced ESD protection

  • TypeOther
  • ColorWhite
  • SpecificationsDimensions: 7.73 x 3.68 x 1.28" Weight: 0.63 lb. Interface C
  • FeaturesReliable Long-Distance Gigabit PoE Runs Enhanced ESD Protect
  • Enables gigabit PoE over fiber for long-distance deployments
  • Accepts 16 to 57 V DC input for flexible power sourcing
  • Delivers 24 V or 50 V passive PoE via RJ45 or terminal block
  • Consumes only 1.5 W typical power for efficient operation
  • Provides enhanced ESD protection and EMI reduction for outdoor reliability

Fibre PoE transport for outdoor devices

The Ubiquiti F-POE-G2 converts a 1 Gbps SFP link into a 1000 Mbps Ethernet PoE connection for outdoor equipment. It accepts 16 to 57 V DC input and delivers 24 V or 50 V passive PoE through two-pair or four-pair wiring. Typical power draw is 1.5 W.

SFP and passive PoE distance limits

The single SFP port dictates that fibre type and module choice set the maximum link length. Passive PoE output has no active negotiation, so cable resistance and voltage drop determine the practical reach for powered devices. Enhanced ESD protection and EMI reduction help maintain signal integrity on long runs.

Check fibre module and voltage compatibility

Verify that your SFP module matches the required fibre mode and distance. Confirm the powered device accepts 24 V or 50 V passive PoE on the correct pin pairs. Ensure the DC source stays within the 16 to 57 V input range and that wiring uses the terminal block or RJ45 injection port correctly.

Highlights

  • Enables gigabit PoE over fiber for long-distance deployments
  • Accepts 16 to 57 V DC input for flexible power sourcing
  • Delivers 24 V or 50 V passive PoE via RJ45 or terminal block
  • Consumes only 1.5 W typical power for efficient operation
  • Provides enhanced ESD protection and EMI reduction for outdoor reliability

Specifications

BrandUBiQuiTi
ModelF-POE-G2
TypeOther
ColorWhite
SpecificationsDimensions: 7.73 x 3.68 x 1.28"
Weight: 0.63 lb.
Interface Connections:
1 x 1 Gbps SFP Port
1 x DC Terminal Block
1 x DC RJ45 Port DC Injection
1 x 1000 Mbps Ethernet PoE Port
Typical Power Consumption 1.5W
PoE Output: PoE RJ45 Port, 2-Pair (4, 5+; 7, 8-) (24V DC), or 4-Pair (24V DC or 50V DC) PoE
DC Output: Terminal Block, 2-Wire (24V DC or 50V DC)
Input DC Voltage: 16 to 57V
FeaturesReliable Long-Distance Gigabit PoE Runs
Enhanced ESD Protection and EMI Reduction
Dependable 24V / 50V Passive PoE Transport
Shipping weight0.11 kg
Package size248 × 127 × 70 mm

Questions about this item

Should I choose the 24 V or 50 V passive PoE output for my outdoor device?

Select 24 V for standard Ubiquiti outdoor radios or 50 V for gear that requires the higher passive voltage; the F-POE-G2 supports both on the PoE RJ45 port and the DC terminal block.

What does the 1.5 W typical power consumption mean once the unit is installed?

The converter itself draws only 1.5 W, so nearly all of the 16 to 57 V input power is delivered to the connected PoE device over the fibre link.

How far can the 1 Gbps SFP port actually carry gigabit PoE?

Distance is limited by the SFP transceiver you install; the F-POE-G2 simply passes 1000 Mbps Ethernet and 24 V or 50 V passive PoE through whatever single-mode or multi-mode module you choose.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.