Ubiquiti Networks
Ubiquiti Networks airMAX Lite AP GPS (LAP-GPS) access point
5 GHz sector access point with GPS sync delivers 450+ Mbps throughput over 12+ km links for 50+ clients
- Frequency BandOperating Frequency (MHz) US/CA U-NII-1 U-NII-2A U-NII-2C U-
- LAN Ports(1) GbE RJ45 port
- Power SupplyPower method Passive PoE 2-pair (4, 5+; 7, 8 return) Power s
- Temperature-40 to 70° C (-40 to 158° F)
- Humidity5 to 95% noncondensing
- Dimensions361 x 124.6 x 71.3 mm (14.2 x 4.9 x 2.8")
- GPS sync enables co-located sectors without interference
- 450+ Mbps throughput serves 50+ clients per AP
- 12+ km range with integrated 5 GHz antenna
- 1 W max draw from included 24 V PoE adapter
- Operating range -40 °C to 70 °C and 5–95 % humidity
Sector 5 GHz access point with GPS sync
The airMAX Lite AP GPS is a 5 GHz sector access point designed for wireless ISPs and point-to-multipoint deployments. It delivers up to 450 Mbps throughput and supports 50 clients per radio. Integrated GPS synchronisation enables co-located sectors to operate without self-interference. A dedicated spectral analysis radio scans the band for noise and interference.
Single gigabit port powered by passive PoE
The unit has one GbE RJ45 port for data and power. It accepts passive PoE on pairs 4,5 and 7,8 with a supported input range of 20 to 27V DC. A 24V 0.3A gigabit PoE adapter is included. Maximum draw is 7.1W so the injector and cabling must handle the current at the chosen voltage. No separate mains supply is required.
Outdoor rated from -40 to 70 °C
Operating temperature spans -40 to 70 °C (-40 to 158 °F) with 5 to 95% non-condensing humidity. The sealed enclosure has no moving parts so acoustic output is effectively zero. Typical power consumption stays below 7.1W under load. The integrated antenna and GPS module add no active cooling requirement.
Highlights
- GPS sync enables co-located sectors without interference
- 450+ Mbps throughput serves 50+ clients per AP
- 12+ km range with integrated 5 GHz antenna
- 1 W max draw from included 24 V PoE adapter
- Operating range -40 °C to 70 °C and 5–95 % humidity
Specifications
| Brand | Ubiquiti Networks |
|---|---|
| Series | Wireless |
| Model | LAP-GPS |
| Frequency Band | Operating Frequency (MHz) US/CA U-NII-1 U-NII-2A U-NII-2C U-NII-3 5150 - 5250 MHz 5250 - 5350 MHz 5470 - 5725 MHz 5725 - 5850 MHz Worldwide 5150 - 5875 MHz Management Radio (MHz) US/CA 2412 - 2462 MHz Worldwide 2412 - 2472 MHz |
| LAN Ports | (1) GbE RJ45 port |
| Power Supply | Power method Passive PoE 2-pair (4, 5+; 7, 8 return) Power supply 24V, 0.3A gigabit PoE adapter (Included) Supported voltage range 20—27V DC Max. power consumption 7.1W |
| Temperature | -40 to 70° C (-40 to 158° F) |
| Humidity | 5 to 95% noncondensing |
| Dimensions | 361 x 124.6 x 71.3 mm (14.2 x 4.9 x 2.8") |
| Weight | 752 g (1.66 lb) |
| Shipping weight | 4.54 kg |
| Package size | 381 × 254 × 127 mm |
Questions about this item
How many simultaneous clients can the access point support before throughput drops?
The unit is rated for 50+ client capacity with 450+ Mbps throughput.
What is the maximum power draw during continuous 24-hour operation?
Maximum power consumption is 7.1W supplied by the included 24V 0.3A passive PoE adapter.
Which mounting hardware and cabling must be on site before installation?
The box includes the 24V PoE injector; you must provide a pole or wall mount and a shielded Cat5e or better Ethernet cable.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



