Ubiquiti Networks
Ubiquiti Networks AC HD UAP-AC-HD-US WiFi 5 access point
Enterprise Wi-Fi 5 access point supports 500+ concurrent clients with 4x4 MU-MIMO and up to 1,733 Mbps on 5 GHz
- # of Users500+
- Standards802.11 a/b/g/n/ac/ac-wave2
- WiFi GenerationWi-Fi 5
- SecurityWEP, WPA-PSK, WPA-Enterprise (WPA / WPA2, TKIP / AES) 802.11
- Antenna(2) Dual-Port, Dual-Polarity Antennas, 3 dBi each (2) Dual-P
- Mounting LocationIndoor
- Supports 500+ concurrent clients for high-density environments
- 4x4 MU-MIMO with 8 spatial streams boosts multi-user throughput
- Dual gigabit Ethernet ports enable wired backhaul and PoE+ power
- Unified controller software simplifies configuration and monitoring
- Indoor and outdoor rated up to 140 m operating range
Indoor and outdoor enterprise WiFi 5 access point
The Ubiquiti UAP-AC-HD-US is a ceiling-mounted wireless access point built for high-density environments. It supports over five hundred concurrent clients using 802.11ac Wave 2 technology with four-by-four MU-MIMO. The unit operates on both 2.4 GHz and 5 GHz bands simultaneously and is rated for indoor or outdoor deployment.
PoE+ powered with dual gigabit ports and reset
Installation uses passive Power over Ethernet at forty-eight volts or 802.3at PoE+ through either of the two 10/100/1000 Ethernet ports. A single reset button provides a hardware fallback. The access point draws up to seventeen watts and includes a 48V 0.5A PoE gigabit adapter in the box.
Verify controller software
The device is managed exclusively through the UniFi Controller software, so confirm your platform can run it. Ensure the mounting location can accommodate the unit's dimensions of one point eight nine by eight point six six by eight point six six inches and its weight of one point five four pounds. Operating temperature range spans minus ten to seventy degrees Celsius with five to ninety-five percent non-condensing humidity.
Highlights
- Supports 500+ concurrent clients for high-density environments
- 4x4 MU-MIMO with 8 spatial streams boosts multi-user throughput
- Dual gigabit Ethernet ports enable wired backhaul and PoE+ power
- Unified controller software simplifies configuration and monitoring
- Indoor and outdoor rated up to 140 m operating range
Specifications
| Brand | Ubiquiti Networks |
|---|---|
| Model | AC HD |
| Part Number | UAP-AC-HD-US |
| # of Users | 500+ |
| Standards | 802.11 a/b/g/n/ac/ac-wave2 |
| WiFi Generation | Wi-Fi 5 |
| Security | WEP, WPA-PSK, WPA-Enterprise (WPA / WPA2, TKIP / AES) 802.11 w/ PMF |
| Antenna | (2) Dual-Port, Dual-Polarity Antennas, 3 dBi each (2) Dual-Port, Dual-Polarity Antennas, 4 dBi each |
| Mounting Location | Indoor |
| Operating Range | Indoor: Up to 140m, Outdoor: Up to 140m |
| Interface | 2 x 10/100/1000 Ethernet Ports |
| Buttons | Reset |
| Power Supply | Power Method: Passive Power over Ethernet (48V), 802.3at PoE+ Supported Power Supply: 48V, 0.5A PoE Gigabit Adapter Maximum Power Consumption: 17W |
| Temperature | Operating Temperature: -10 ~ 70 degree Celsius (14 ~ 158 degree Fahrenheit) |
| Humidity | 5 to 95% Noncondensing |
| Dimensions | 1.89" x 8.66" x 8.66" |
| Weight | 1.54 lbs. |
| Features | Simultaneous Dual-Band 4x4 Multi-User MIMO Four-Stream 802.11AC Wave 2 Technology 802.3at Poe+ Compatibility 2 x 10/100/1000 Ethernet Ports UniFi Controller Software Integrated Omni Antennas Guest Portal / Hotspot Support Passive Power over Ethernet 500+ Concurrent Clients Reset Button CE, FCC, IC Certified |
| Shipping weight | 1.70 kg |
| Package size | 269 × 254 × 112 mm |
Questions about this item
How can I verify the UAP-AC-HD-US is operating correctly after ceiling installation?
Check the UniFi Controller dashboard for the access point status showing "Connected", confirm both 2.4GHz and 5GHz radios report active clients, and validate throughput reaches up to 1733Mbps on 5GHz and 800Mbps on 2.4GHz with MU-MIMO enabled.
What does the UAP-AC-HD-US package include and what must I purchase separately?
The box contains the access point with integrated omni antennas, mounting hardware for ceiling or wall, and a 48V 0.5A PoE Gigabit adapter; you must supply a PoE+ switch or injector if not using the included adapter, and Ethernet cabling.
Which version of the UAP-AC-HD-US should I choose for a high-density office with 500-plus users?
The single UAP-AC-HD-US model supports 500+ concurrent clients with 4x4 MU-MIMO and 8 spatial streams; select this SKU for high-density indoor deployments and add additional units to scale coverage across larger areas.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



