We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular PoE injector with two shielded RJ45 ports

Ubiquiti Networks

Ubiquiti Networks 50V 60W PoE Adapter Gigabit LAN

SKU CH-PV7R-9ATNE

A 50V, 60W Power over Ethernet adapter with a Gigabit LAN port and surge protection for Ubiquiti airFiber, airMAX, airVision, UniFi, and mFi devices

  • Powers airFiber, airMAX, airVision, UniFi and mFi devices with 50V 60W output
  • Protects equipment from surge, clamping, peak pulse current and ESD attacks
  • Provides earth grounding when used with shielded cabling for enhanced safety
  • Gigabit LAN port enables high-speed wired connectivity for powered devices
  • Two shielded RJ45 connectors ensure reliable PoE and data transmission

Ubiquiti 50V 60W PoE Adapter

This 50V Power over Ethernet adapter supplies 60W to compatible Ubiquiti airFiber, airMAX, airVision, UniFi and mFi devices. It includes two shielded RJ45 ports for Gigabit LAN connectivity. Built-in protection covers surge, clamping, maximum surge discharge, peak pulse current and ESD attacks. Earth grounding is provided for additional safety.

Capacity and headroom: 60W at 50V

The adapter delivers 60W at 50V, matching the requirement of supported Ubiquiti PoE hardware. It runs a single device per connection and does not scale beyond the rated output. The Gigabit LAN port handles full line-rate traffic without bottleneck. Surge and ESD protection operates continuously within the specified clamping limits.

Replaces lower-wattage or unprotected injectors

Installers upgrading from adapters without surge clamping or earth grounding gain hardened protection for outdoor links. The jump is worth it when deploying airFiber, airMAX, airVision, UniFi or mFi gear that demands 50V 60W and shielded cabling. It is not for devices requiring a different voltage, higher wattage or passive PoE schemes.

Highlights

  • Powers airFiber, airMAX, airVision, UniFi and mFi devices with 50V 60W output
  • Protects equipment from surge, clamping, peak pulse current and ESD attacks
  • Provides earth grounding when used with shielded cabling for enhanced safety
  • Gigabit LAN port enables high-speed wired connectivity for powered devices
  • Two shielded RJ45 connectors ensure reliable PoE and data transmission

Specifications

No published specifications for this item yet.

Questions about this item

Will this 50V 60W PoE adapter power my existing airMAX or UniFi access points that use lower-voltage PoE?

The adapter supplies 50V at 60W and is listed for airFiber, airMAX, airVision, UniFi and mFi PoE devices; check each device's voltage requirement before connecting.

How can I verify the Gigabit LAN port is passing traffic at full speed after I install the adapter?

Connect a laptop to the RJ45 LAN port, run a local throughput test or check the link speed in the OS network settings — it should report 1 Gbps.

Does the box include the shielded RJ45 connectors and TOUGHCable needed for the ESD and surge protection mentioned in the specs?

The adapter provides two shielded RJ45 ports and grounding; TOUGHCable and its connectors are sold separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.