Uakinat E-1078 2.0 USB speaker 6 W black
Compact 2.0 USB-powered desktop speakers deliver 6 W total output with 3.5 mm audio input, touch volume control and RGB lighting
- TypeMultimedia
- ColorBlack
- Configuration2.0
- Connector TypeAuxiliary
- Total Power6 watts
- Satellite RMS Power /ea6 watts
- USB-powered 6 W stereo sound with 3.5 mm audio input
- Plug-and-play setup needs no driver installation
- Touch remote and in-line wheel give instant volume control
- Compact 2.75 × 3.07 × 2.55 in columns fit any desk
- 60 dB signal-to-noise ratio for clean playback
Compact 2.0 desktop speaker
The Uakinat E-1078 is a 2.0 channel multimedia speaker system finished in black. It delivers a total output of 6 watts through two 3 watt drivers and connects via a 3.5 mm auxiliary input for audio and USB for power. The frequency response spans 100 Hz to 20 KHz with a signal-to-noise ratio of 60 decibels.
Suited for simple stereo setups
This speaker suits users who want a small, plug-and-play stereo solution for a desktop or laptop without installing drivers. The in-line volume wheel and touch remote provide quick level changes. Buyers who need more storage, wireless streaming, a subwoofer channel or higher continuous power should look at something else.
Included cables and manual
The package supplies a USB power cable and a 3.5 mm audio cable so the system works immediately after connection. A user manual is also provided. The cables measure 47.24 inches in total length and allow up to 31.5 inches of separation between the two satellites for flexible placement.
Highlights
- USB-powered 6 W stereo sound with 3.5 mm audio input
- Plug-and-play setup needs no driver installation
- Touch remote and in-line wheel give instant volume control
- Compact 2.75 × 3.07 × 2.55 in columns fit any desk
- 60 dB signal-to-noise ratio for clean playback
Specifications
| Brand | Uakinat |
|---|---|
| Model | E-1078 |
| Type | Multimedia |
| Color | Black |
| Configuration | 2.0 |
| Connector Type | Auxiliary |
| Total Power | 6 watts |
| Satellite RMS Power /ea | 6 watts |
| Driver | dynamic_driver |
| Frequency Response | 20 KHz |
| Impedance | 4 ohm |
| Signal to Noise Ratio(SNR) | 60 decibels |
| Remote | touch |
| Dimension | 2.75 in x 3.07 in x 2.55 in |
| Weight | 0.399 kilograms |
Questions about this item
What connections does my computer need for the USB power and 3.5 mm audio cables?
The speakers draw power from a USB-A port and receive audio through a 3.5 mm headphone jack. Both cables are attached to the speaker set.
Will the 6 W total output and 4 Ω impedance work with my older sound card?
Yes. The 2.0 stereo set is designed for standard line-level outputs, so any legacy sound card with a 3.5 mm jack can drive the 4 Ω load at 6 W.
How can I confirm the speakers are operating correctly after plugging them in?
Select "USB Speaker" as the playback device in Windows, play audio, and use the in-line volume wheel to verify sound from both channels and that the RGB LEDs illuminate.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
BFKK Hecate G1000 Black speaker 10W Bluetooth 5.3 12 RGB 2.5in 3.5mm
- Black



