We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver duplicator with 31 SD card slots on top

U-Reach, Inc.

U-Reach, Inc. SD932G 1:31 SD/MicroSD Duplicator 2GB/min 33MB/s

SKU CH-M0K1-E4FMQ

Standalone SD and MicroSD duplicator copies up to 31 cards simultaneously at 2GB per minute with three erase modes and modular port replacement

  • Target1 to 31
  • Data Transfer Rate2GB/min
  • Standalone operation eliminates the need for a PC or software
  • Copies up to 31 targets simultaneously at 2GB/min per port
  • Sanitises media with Quick, Full or DoD erase modes
  • Modular socket design allows individual port replacement to cut downtime
  • Built-in H3, H5, H6 and capacity tests verify card quality

Standalone 1-to-31 SD Duplicator

The U-Reach SD932G copies or erases up to 31 SD or MicroSD cards at once without a host computer. Each port sustains up to 2 GB per minute and 33 MB/s for bit-by-bit duplication across Linux, Mac and Windows file systems. Quick-copy mode copies only used sectors to save time.

Passive thermal design with zero fan noise

The unit runs completely standalone, drawing power only for the embedded controller and active ports. No moving parts mean silent operation and no airflow requirements in a rack or on a bench. Power consumption scales with the number of populated sockets.

Modular socket bays for quick port replacement

Individual SD modules swap out in seconds, so a worn slot never takes the whole duplicator offline. The embedded controller supports media capacities above 18 TB, freeing you from legacy capacity ceilings. DoD, full and quick erase modes sanitise cards to regulatory standards.

Highlights

  • Standalone operation eliminates the need for a PC or software
  • Copies up to 31 targets simultaneously at 2GB/min per port
  • Sanitises media with Quick, Full or DoD erase modes
  • Modular socket design allows individual port replacement to cut downtime
  • Built-in H3, H5, H6 and capacity tests verify card quality

Specifications

Target1 to 31
Data Transfer Rate2GB/min

Questions about this item

How do I install the SD932G duplicator and what step do users often miss?

Place the unit on a stable surface, connect the power cord, insert the source SD or microSD card into the source slot, load up to 31 target cards into the target slots, then press the start button; the step often missed is confirming each target card is fully seated in its modular socket before starting.

What maintenance or replacement will the SD932G need later?

Individual port modules can be swapped out when a socket wears or fails; the modular socket design lets you replace only the affected port without sending the whole unit for service.

What limit appears first during sustained high-volume copying on the SD932G?

The per-port transfer rate caps at 2 GB per minute and 33 MB/s, so sustained bulk jobs are limited by that throughput ceiling rather than the 31-port capacity.

New to this? Paying with USDT: TRC-20 or ERC-20 — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.