We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal inverter unit with LCD display and multiple AC output terminals

u-power

u-power 64000W Peak 16000W Power Inverter 24V DC 110V 220V AC 60Hz

SKU CH-3G75-5XF1Q

A 24 V DC to 110 V and 220 V AC split-phase pure sine wave inverter delivering 16 000 W continuous and 64 000 W peak power with integrated UPS, battery charger and LCD display

  • Delivers 16000W continuous power for heavy-duty loads
  • Peak capacity of 64000W handles demanding motor starts
  • Pure sine wave output protects sensitive electronics
  • Split-phase design supplies 110V and 220V simultaneously
  • Integrated UPS and battery charger ensure uninterrupted operation

24 V pure sine wave inverter

The u-power unit converts 24 V DC into split-phase 110 V and 220 V AC at 60 Hz. It delivers 8 000 W continuous on each voltage leg and 16 000 W total continuous power. A built-in LCD shows output data, and the integrated UPS with battery charger supports solar or backup installations. The low-frequency topology suits heavy inductive loads.

8 000 W per leg with 32 000 W peak headroom

Each 110 V or 220 V output runs 8 000 W continuously and can surge to 32 000 W for motor starts. When both voltages are used together the inverter still supplies 8 000 W total continuous and 32 000 W peak. Running 220 V alone is possible but the display then reports only half the actual wattage and current.

Split-phase control board prefers 110 V loading

The factory control board regulates 110 V output as the reference, so balanced 110 V and 220 V loading or heavier 110 V use gives the most accurate metering. If the application demands full 220 V metering without 110 V load, a custom control board is required. This constraint decides whether the stock unit fits the installation.

Highlights

  • Delivers 16000W continuous power for heavy-duty loads
  • Peak capacity of 64000W handles demanding motor starts
  • Pure sine wave output protects sensitive electronics
  • Split-phase design supplies 110V and 220V simultaneously
  • Integrated UPS and battery charger ensure uninterrupted operation

Specifications

BrandU-POWER

Questions about this item

Can the 24V DC inverter run alongside my existing 24V battery bank and charge controller without conflicts?

Yes, the unit accepts 24V DC input and includes a built-in battery charger and UPS function, so it can share the same battery bank while the charge controller maintains the batteries.

What should I check on the LCD after wiring to confirm the split-phase output is balanced?

The display shows voltage, current and wattage for both 110V and 220V legs; verify that L1+N and L2+N each read near 110V and that combined L1+L2 reads near 220V with loads applied.

Does the package include DC cables, battery terminals or a remote panel, or must I source them separately?

The inverter ships with the LCD display, UPS and battery-charger functions integrated; DC cables, battery lugs and any remote monitoring accessories are not included and must be purchased separately.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.