We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Silver metal rectangular inverter unit with front LCD display and terminal connections

u-power

u-power 60000W Peak 15000W Power Inverter 24V DC to 110V 220V AC 60Hz Split Phase Pure Sine Wave

SKU CH-74KY-2H7MR

Converts 24 V DC to split-phase 110 V and 220 V AC at 60 Hz with 15 000 W continuous and 60 000 W peak output, plus integrated UPS, battery charger and LCD display

  • Delivers 15000W continuous power for demanding loads
  • Handles 60000W peak surge for motor starts
  • Split-phase 110V and 220V simultaneous output
  • Pure sine wave suits sensitive electronics
  • Integrated UPS and battery charger simplify backup

Power Inverter for 24 V DC Systems

This u-power inverter converts 24 V DC into split-phase AC at 110 V and 220 V with a 60 Hz frequency. It delivers 15 000 W continuous power and a 60 000 W peak rating for demanding off-grid or backup installations. The unit includes a built-in UPS function, battery charger and LCD display for monitoring.

Split-Phase 110 V / 220 V Output Configuration

The inverter provides 7 500 W continuous and 30 000 W peak on each voltage leg whether used separately or simultaneously. L1+N and L2+N each supply 110 V while L1+L2 supplies 220 V. The control board is optimised for 110 V regulation so balanced or 110 V-heavy loads are recommended for accurate LCD readouts.

Suited for Solar and Backup Installations Needing

Installers who require both 110 V and 220 V from a single 24 V battery bank will benefit from the split-phase design and integrated charger. Buyers needing 220 V only with full LCD accuracy should note the display shows half data unless the control board is customised. Systems requiring a different DC input voltage are not compatible.

Highlights

  • Delivers 15000W continuous power for demanding loads
  • Handles 60000W peak surge for motor starts
  • Split-phase 110V and 220V simultaneous output
  • Pure sine wave suits sensitive electronics
  • Integrated UPS and battery charger simplify backup

Specifications

BrandU-POWER

Questions about this item

What does the 15000 W continuous rating mean when I run 110 V and 220 V loads together?

The inverter delivers 7500 W continuous on 110 V and 7500 W on 220 V simultaneously, totalling 15000 W.

How does the split-phase output limit what I can draw from each voltage?

L1+N and L2+N each give 110 V at up to 7500 W; L1+L2 gives 220 V at up to 7500 W. The control board favours 110 V regulation, so balanced or 110 V-heavy loads are recommended.

What DC input and physical connections are required to install this unit?

It needs a 24 V DC source and provides L1, N and L2 AC terminals for split-phase wiring.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.