We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular silver metal inverter unit with front LCD display and ventilation grilles

u-power

u-power 40000W Peak 10000W Power Inverter 48V DC 110V 220V AC 60Hz

SKU CH-HCP8-WBTDP

Converts 48V DC to split-phase 110V and 220V AC at 60Hz with 5000W continuous and 20000W peak per phase, plus 40000W peak surge, pure sine wave output, built-in UPS, battery charger and LCD display

  • Delivers 10000W continuous power from a 48V DC source
  • Handles 40000W peak surge for demanding motor starts
  • Supplies both 110V and 220V AC simultaneously at 60Hz
  • Pure sine wave output protects sensitive electronics
  • Integrated UPS and battery charger simplifies solar installations

Split-phase inverter for 48 V systems

This low-frequency pure-sine-wave inverter converts 48 V DC into simultaneous 110 V and 220 V AC at 60 Hz, delivering 5000 W continuous per leg with a 10000 W combined rating. It suits off-grid solar installations, backup-power setups and mobile applications that require both North-American and European voltages from a single battery bank.

Built-in charger and UPS with LCD monitoring

The unit integrates a 110 V battery charger and automatic UPS transfer so connected loads stay powered during grid loss. An LCD panel reports voltage, current and wattage for each output, while power-save mode reduces idle draw. Terminal blocks accept L1, L2 and neutral for flexible split-phase wiring.

40000 W peak surge for motor loads

The inverter can supply 20000 W peak on each 110 V or 220 V circuit, reaching 40000 W total instantaneous power to start heavy inductive loads such as compressors or pumps. Continuous output remains limited to 5000 W per voltage, so systems sized only for sustained draw above that level will need additional capacity.

Highlights

  • Delivers 10000W continuous power from a 48V DC source
  • Handles 40000W peak surge for demanding motor starts
  • Supplies both 110V and 220V AC simultaneously at 60Hz
  • Pure sine wave output protects sensitive electronics
  • Integrated UPS and battery charger simplifies solar installations

Specifications

BrandU-POWER

Questions about this item

How much continuous power does the 48 V DC to 110 V / 220 V AC split-phase inverter deliver on each leg?

The unit supplies 5000 W continuous on the 110 V leg, 5000 W continuous on the 220 V leg, or 5000 W combined when both voltages run together.

What DC cable size and battery bank voltage are required for the 10000 W continuous rating?

A 48 V battery bank and cables rated for the full DC current are needed; the inverter draws roughly 200 A at 48 V when delivering 10000 W.

Which AC output terminals must be wired to enable both 110 V and 220 V loads simultaneously?

Connect L1, N and L2 — L1+N gives 110 V, L2+N gives the second 110 V, and L1+L2 gives 220 V; the LCD then shows full data for both voltages.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.