We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Rectangular metal inverter with LCD screen and multiple AC output sockets

u-power

u-power 40000W Peak 10000W Power Inverter 24V DC 110V 220V AC 60Hz Pure Sine Wave Split Phase UPS Charger LCD

SKU CH-QRDE-R1M5C

Converts 24 V DC to 110 V and 220 V AC split-phase output with 5000 W continuous and 40000 W peak capacity, pure sine wave, built-in UPS and battery charger

  • Pure sine wave output protects sensitive electronics
  • 5000W continuous power on both 110V and 220V circuits
  • Split-phase design delivers 110V and 220V simultaneously
  • Built-in UPS and battery charger ensure uninterrupted supply
  • LCD display shows real-time voltage and current data

Split-phase 24 V inverter for off-grid

This pure-sine-wave unit converts 24 V DC to simultaneous 110 V and 220 V AC at 60 Hz. It suits solar installations, mobile power rigs and critical-load backup where both voltage rails are needed from one device.

Low-frequency topology

The transformer-based design delivers 5000 W continuous on each rail with 20000 W peak per rail and 40000 W combined surge. An integrated charger and automatic transfer switch provide uninterrupted power while the display reports voltage, current and load status.

5000 W continuous per rail decides fit for your load

Size the inverter so that no single 110 V or 220 V circuit exceeds 5000 W steady draw. Builds that require more than 5000 W on one leg or need a 220 V-preferred control board will need a different unit.

Highlights

  • Pure sine wave output protects sensitive electronics
  • 5000W continuous power on both 110V and 220V circuits
  • Split-phase design delivers 110V and 220V simultaneously
  • Built-in UPS and battery charger ensure uninterrupted supply
  • LCD display shows real-time voltage and current data

Specifications

BrandU-POWER

Questions about this item

How do I wire the split-phase 24 V DC inverter for both 110 V and 220 V AC loads?

Connect the battery bank to the 24 V DC terminals, then use L1+N for 110 V, L2+N for the second 110 V leg, and L1+L2 for 220 V; the manufacturer recommends balancing 110 V and 220 V loads simultaneously for best LCD accuracy.

What ongoing maintenance does the low-frequency pure-sine unit with UPS and battery charger require?

Keep the ventilation openings clear, check DC cable torque and battery electrolyte levels monthly, and verify the LCD read-outs match actual load currents during routine inspections.

At what sustained power level does the 40000 W peak inverter hit its continuous limit?

The continuous rating is 5000 W whether you draw 110 V, 220 V, or both together; exceeding that level will trigger the protection circuitry.

New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.