Tyrap
Tyrap TY33M Cable Tie 4 in 18 lb Natural Nylon 6/6 18
A 4-inch natural nylon cable tie with an 18 lb tensile strength and a #4 screw-mount hole for secure bundling up to 5/8 inch diameter
- TypeCable Management & Conduit
- ColorNatural
- Mountable design secures bundles to surfaces with #4 screw hole
- Stainless steel barb lock resists vibration and holds 18 lb tensile strength
- Plenum-rated UL Type 21 nylon meets air-handling space codes
- Halogen-free, weather-resistant material withstands -40 °F to 185 °F
- Miniature 4 in length and 0.09 in width fits tight routing spaces
Product Identity
The TY-RAP TY33M is a 4-inch natural nylon 6/6 cable tie rated at 18 lb tensile strength. It suits installers who need a miniature, screw-mountable strap for securing small wire bundles in panels or enclosures.
Installation Notes
The tie mounts with a #4 screw through its integrated tab and locks via a stainless steel barb. The 0.09-inch width and 0.04-inch thickness allow it to fit tight spaces, but the 5/8-inch maximum bundle diameter limits use to very small cable groups.
Critical Specification
UL Type 21 and plenum-rated, it withstands -40 to 185 degrees F and is halogen-free for indoor air-handling spaces. It is not weather-rated for outdoor exposure and lacks flame-retardant or metal-detectable properties.
Highlights
- Mountable design secures bundles to surfaces with #4 screw hole
- Stainless steel barb lock resists vibration and holds 18 lb tensile strength
- Plenum-rated UL Type 21 nylon meets air-handling space codes
- Halogen-free, weather-resistant material withstands -40 °F to 185 °F
- Miniature 4 in length and 0.09 in width fits tight routing spaces
Specifications
| Brand | TY-RAP |
|---|---|
| Type | Cable Management & Conduit |
| Color | Natural |
Questions about this item
How do I confirm the TY33M tie is holding at its 18 lb tensile strength after installation?
Pull the strap until the stainless-steel barb clicks into the locking head; the tie should not slip when the bundle is loaded up to 18 lb.
What comes in the package and do I need separate mounting screws?
The pack contains the nylon 6/6 tie with integrated #4 screw-mount hole; #4 screws are not included and must be purchased separately.
Which TY-RAP version should I choose for a plenum-rated, halogen-free 4-inch tie?
The TY33M meets UL type 21, is plenum rated and halogen-free, making it the correct choice for that specification.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



