We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Natural nylon cable tie, 8.75 inches long, smooth locking head

Tyrap

Tyrap TY272M Cable Tie 8.75 in 120 lb Natural Nylon 6/6

SKU CH-3282-11BCD

Heavy-duty nylon 6/6 cable tie measuring 8.75 inches with 120 lb tensile strength and stainless steel locking barb

  • TypeCable Management & Conduit
  • ColorNatural
  • Heavy-duty tensile strength rated at 120 lb
  • Stainless-steel barb lock resists vibration loosening
  • Halogen-free nylon 6/6 meets plenum safety codes
  • Wide temperature range from -40 to 185 °F
  • 75 in length secures bundles up to 1.97 in diameter

Tyrap TY272M Cable Tie 8.75 in 120 lb

The Tyrap TY272M is a heavy-duty nylon 6/6 cable tie designed for bundling wires and cables up to a maximum diameter of 1.97 inches. It suits installers and technicians who need a single, high-strength fastening solution for demanding cable management tasks.

Thermals noise and power draw

As a passive nylon fastening component, the tie generates no heat, produces no audible noise and draws zero electrical power during normal use. Its operating temperature range spans from -40 degrees to 185 degrees Fahrenheit, ensuring reliable performance across extreme environmental conditions.

120 lb tensile strength decides fit

The 120 pound tensile strength rating is the key specification determining whether this tie can secure your specific bundle load. Buyers needing a lower strength rating or a different locking mechanism should select an alternative product.

Highlights

  • Heavy-duty tensile strength rated at 120 lb
  • Stainless-steel barb lock resists vibration loosening
  • Halogen-free nylon 6/6 meets plenum safety codes
  • Wide temperature range from -40 to 185 °F
  • 75 in length secures bundles up to 1.97 in diameter

Specifications

BrandTY-RAP
TypeCable Management & Conduit
ColorNatural

Questions about this item

How do I install the TY272M cable tie and what step is often missed?

Wrap the 8.75 in strap around the bundle, insert the tail into the head, and pull tight so the stainless steel barb locks; the step often missed is verifying the bundle diameter does not exceed 1.97 in before tensioning.

What maintenance or replacement will the TY272M cable tie need later?

The nylon 6/6 tie is a single-use fastener; once the stainless steel barb engages it cannot be released, so plan to cut and replace it whenever the bundle must be changed or inspected.

What limit appears first on the TY272M cable tie under sustained use?

The 120 lb tensile strength is the first hard limit; loads above that will cause the strap or barb to fail, and continuous exposure near 185 °F accelerates nylon degradation.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.