We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black nylon cable tie 11.6 inches long with stainless steel locking barb

Tyrap

Tyrap TY253MX Cable Tie 11.6 in Black Nylon

SKU CH-SJYB-Q4YVW

An 11.6-inch black nylon cable tie with a stainless-steel locking barb, rated for 50 lb tensile strength and a 3.07-inch maximum bundle diameter

  • TypeCable Management & Conduit
  • ColorBlack
  • 6 in length secures bundles up to 3.07 in diameter
  • 50 lb tensile strength holds heavy cable runs reliably
  • Stainless steel barb lock resists vibration loosening
  • UV and weather resistant for durable outdoor installation
  • Plenum rated and halogen free meets strict fire safety codes

Tyrap TY253MX Cable Tie

The Tyrap TY253MX is a black nylon cable tie designed for general-purpose bundling and wire management. It suits installers, technicians and DIY users who need a single, reliable fastener for organising cables in indoor or outdoor environments. The stainless-steel barb locking style provides a secure hold once tensioned. This standard tie meets UL Type 2, 21S requirements and is plenum rated for use in air-handling spaces.

Thermal and environmental performance

The tie operates across a temperature range of -76 degrees to 221 degrees F, making it suitable for both cold-storage and high-heat locations. It is halogen-free, UV light resistant and weather resistant, so it maintains integrity when exposed to sunlight or moisture. The nylon material is not flame retardant and is not metal detectable, which should be noted for projects with specific safety or detection requirements.

Deciding specification: 50 lb tensile strength

The 50 lb tensile strength is the single figure that determines whether this tie can handle your bundle load. With a maximum bundle diameter of 3.07 in and an actual length of 11.6 in, it accommodates medium-sized cable groups. If your application demands higher tensile capacity or a larger bundle diameter, this model will not meet the requirement.

Highlights

  • 6 in length secures bundles up to 3.07 in diameter
  • 50 lb tensile strength holds heavy cable runs reliably
  • Stainless steel barb lock resists vibration loosening
  • UV and weather resistant for durable outdoor installation
  • Plenum rated and halogen free meets strict fire safety codes

Specifications

BrandTY-RAP
TypeCable Management & Conduit
ColorBlack

Questions about this item

How do I install the TY253MX cable tie and what step do people often get wrong?

Thread the 11.6 in strap through the head, pull tight so the stainless-steel barb locks, then trim the tail; the common mistake is leaving the tail long enough to snag on adjacent cables.

What maintenance or replacement will the TY253MX need later?

Inspect annually for UV-induced brittleness or heat fatigue; replace any tie that shows cracking, discoloration or a loose barb, as the nylon cannot be re-tensioned once cut.

What limit appears first on the TY253MX during sustained outdoor use?

Continuous exposure near the 221 °F upper temperature rating accelerates nylon embrittlement, so thermal ageing typically becomes the limiting factor before the 50 lb tensile strength is reached.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.