Tyrap
Tyrap TY242MX Cable Tie 8.19 in 30 lb Black Nylon 6/6
An 8.19 in black nylon cable tie rated for 30 lb tensile strength and 2 in maximum bundle diameter
- TypeCable Management & Conduit
- ColorBlack
- 30 lb tensile strength holds heavy bundles securely
- Stainless steel barb locks firmly without slipping
- UV and weather resistant for outdoor durability
- Plenum rated and halogen free for safe indoor wiring
- Operates from -40 °F to 185 °F across harsh environments
8.19 in Cable Tie for Small Bundles
The Tyrap TY242MX is a miniature nylon 6/6 cable tie designed for securing wire and cable bundles up to 1.97 in diameter. Its 30 lb tensile strength suits low-voltage and data-cable runs in residential or light-commercial installations. The stainless-steel barb lock provides a secure, one-way fastening that resists vibration.
30 lb Strength with 2 in Bundle Capacity
At 8.19 in actual length and 0.14 in width, the strap wraps bundles as large as 1.97 in while maintaining a slim profile for tight routing spaces. The 30 lb rating covers typical Cat5e, Cat6 and fibre patch cords; heavier power conductors or large trunk cables will exceed the tensile limit. Operating range from -40 °F to 185 °F supports indoor and outdoor exposure.
UL Type 2 and 21 Plenum-Rated Nylon
The tie carries UL Type 2 and 21 listings and is plenum-rated for use in air-handling spaces. Halogen-free, UV-resistant and weather-resistant material allows direct outdoor exposure without degradation. It is not flame-retardant, not metal-detectable and supplies only a single strap per unit, so high-volume projects require multiple packs.
Highlights
- 30 lb tensile strength holds heavy bundles securely
- Stainless steel barb locks firmly without slipping
- UV and weather resistant for outdoor durability
- Plenum rated and halogen free for safe indoor wiring
- Operates from -40 °F to 185 °F across harsh environments
Specifications
| Brand | TY-RAP |
|---|---|
| Type | Cable Management & Conduit |
| Color | Black |
Questions about this item
Will the 1.97 in maximum bundle diameter fit around my existing cable bundles?
The cable tie accepts bundles up to 1.97 in diameter, so measure your current bundles; if they are at or below that size the tie will close fully.
How can I verify the stainless steel barb is locking properly after installation?
Pull the tail through the head until you feel a firm click; the barb engages the nylon teeth and prevents the tie from backing off under load.
Does the pack include mounting bases or tools, or must I buy them separately?
Only the single nylon 6/6 strap is supplied; mounting bases, adhesive pads or installation tools are not included and must be purchased separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.



