We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue vinyl quick-disconnect terminals, 14-16 AWG, partial insulation, pack of 100

Tyrap

Tyrap STA-KON 14RBD-188 Blue Vinyl Quick Disconnects 14-16 AWG PK100

SKU CH-2YPQ-MQ54S

Blue vinyl quick-disconnect terminals accept 14–16 AWG wire with a 0.187 in tab and crimp termination

  • TypeElectrical Connectors
  • Blue vinyl insulation resists heat up to 221 °F
  • Quick-disconnect tabs 0.187 in wide fit 14–16 AWG wire
  • Brazed seam and tin-plated copper ensure reliable crimp connections
  • UL-listed to standard E66716 and RoHS compliant
  • Pack of 100 terminals rated for 300 V maximum voltage

Quick Disconnects for 14-16 AWG Wire

These blue vinyl quick disconnects accept 14 to 16 AWG copper wire with a crimp termination. The partial-coverage vinyl insulation is rated to 221 degrees F. A pack contains 100 pieces for automotive or industrial wiring jobs. The terminals are RoHS compliant and carry UL standard E66716.

Replaces loose or corroded factory terminals

The brazed-seam copper tab with tin finish resists vibration better than unseamed alternatives. Upgrading is worth it when a 0.187 inch tab width and 0.02 inch thickness match the existing connector. The 300 V rating covers typical low-voltage vehicle circuits without change.

Stays secure under continuous vibration

The crimp joint and brazed seam maintain contact resistance during sustained engine or chassis vibration. Vinyl insulation remains flexible at the rated 221 degrees F without cracking. Partial coverage allows visual inspection of the crimp without removing the terminal.

Highlights

  • Blue vinyl insulation resists heat up to 221 °F
  • Quick-disconnect tabs 0.187 in wide fit 14–16 AWG wire
  • Brazed seam and tin-plated copper ensure reliable crimp connections
  • UL-listed to standard E66716 and RoHS compliant
  • Pack of 100 terminals rated for 300 V maximum voltage

Specifications

BrandSTA-KON
TypeElectrical Connectors

Questions about this item

What tab width do the 14RBD-188 disconnects accept?

The quick-disconnect terminals are sized for a 0.187 in tab width and 0.02 in tab thickness, matching standard 14-16 AWG crimp tabs.

Which crimp tool setting prevents a loose connection on 16 AWG wire?

Use a ratchet crimper calibrated for 14-16 AWG brazed-seam terminals; position the wire so the insulation sits just inside the vinyl sleeve before squeezing fully closed.

When should the blue vinyl insulation be replaced?

Replace any connector showing cracked vinyl, melted spots above 221 °F, or corrosion on the tin-plated copper tab — inspect during routine 300 V circuit checks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.