We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black nylon 90-degree liquid-tight cord connector, 3/4 inch MNPT box connection

Tyrap

Tyrap 4972NM 3/4 in 90 deg Black Liquid Tight Connector

SKU CH-XAXE-C52ZK

A 90-degree liquid-tight connector accepting 0.50–0.75 in cord and 3/4 in MNPT box connection, insulated with black nylon body and CSA/UL listed

  • TypeCable Management & Conduit
  • CSA and UL listed for code-compliant installations
  • 90-degree elbow routes cable in tight spaces
  • Accepts cord diameters from .50 to .75 in
  • Black nylon body resists corrosion and UV
  • Insulated 3/4 in MNPT hub protects conductors

3/4 in 90° Liquid-Tight Connector

The ABB 4972NM liquid-tight cord connector accepts a single cable with a diameter between .50 in and .75 in. Its 90-degree nylon body connects to a 3/4 in MNPT box entry and is coloured black. The fitting is insulated and carries CSA 52391 and UL E13938 certifications.

Practical limits of the MNPT interface

The 3/4 in male NPT thread fits only enclosures or hubs cut to that exact pipe size; it will not mate with 1/2 in or 1 in openings without an adapter. The 90-degree sweep requires clearance behind the box wall, so tight corners or shallow enclosures may prevent installation. No external strain-relief gland is provided, so cable pull-out resistance relies solely on the internal compression seal.

Capacity and headroom for cord management

The connector accommodates one cable from .50 in up to .75 in outer diameter, covering many common instrument and control leads. Cables thicker than .75 in exceed the gland range and cannot be sealed; thinner cables below .50 in will not engage the compression nut reliably. The 1 1/2 in body length from box face to cable exit gives a fixed offset that suits standard panel depths but leaves no adjustment for deeper cabinets.

Highlights

  • CSA and UL listed for code-compliant installations
  • 90-degree elbow routes cable in tight spaces
  • Accepts cord diameters from .50 to .75 in
  • Black nylon body resists corrosion and UV
  • Insulated 3/4 in MNPT hub protects conductors

Specifications

TypeCable Management & Conduit
BrandABB

Questions about this item

Should I choose the 90-degree style or a straight connector for my cable routing?

The 90-degree style directs the cable sideways, which is useful when space behind the box is limited; a straight connector would extend the cable outward instead.

What does the 0.50 in to 0.75 in cord diameter range mean when I install this connector?

It means the connector will seal and grip any single cord with an outer diameter between 0.50 in and 0.75 in; cords outside that range will not fit properly.

What does the 3/4 in MNPT box connection cap in practice?

The 3/4 in MNPT threads mate with a matching female NPT entry on the enclosure, limiting the connector to boxes that have that specific thread size.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.