We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Black rectangular charge controller with RJ45 ports and wire terminals

Tycon Power

Tycon Power TP-SCPOE-2424-HP 24V 60W dual-input charge controller

SKU CH-21YQ-4F1J7

Dual-input 24V 60W charge controller accepts PoE up to 2.6A and solar up to 8A with built-in PoE inserter, 1.5A auxiliary output and five status LEDs

  • TypeOther
  • ColorBlack
  • Dual POE and solar inputs ensure 100% uptime redundancy
  • Built-in POE inserter delivers 24V 1A at output port
  • Full electronic protections prevent short circuit and overcharge
  • Five LED indicators show real-time charging and load status
  • Low self-consumption and overdischarge protection extend battery life

Dual-input charge controller

The Tycon Power TP-SCPOE-2424-HP accepts power from both a PoE source and a solar panel simultaneously to charge a 24V battery bank. This redundancy keeps critical wireless infrastructure online when one energy source is unavailable. It suits remote network nodes, security cameras and IoT gateways that demand continuous uptime without mains power.

Built-in protections and efficiency

Electronic safeguards prevent short circuits, reverse current, over-voltage, over-charge and over-discharge. Low self-consumption and automatic overdischarge protection extend battery service life. The unit delivers up to 60W total, with the solar input handling up to 8A and the PoE input up to 2.6A, while a replaceable external fuse protects the circuitry.

Integration and outputs

A built-in PoE inserter supplies 24V at 1A through the RJ45 output port for powering a connected device. A secondary screw-terminal pair provides 24V at 1.5A for auxiliary loads. Solar and battery connections use four wire terminals accepting up to 10AWG conductors. The enclosure measures 159 x 118 x 40mm for compact pole or wall mounting.

Highlights

  • Dual POE and solar inputs ensure 100% uptime redundancy
  • Built-in POE inserter delivers 24V 1A at output port
  • Full electronic protections prevent short circuit and overcharge
  • Five LED indicators show real-time charging and load status
  • Low self-consumption and overdischarge protection extend battery life

Specifications

BrandTycon Power
ModelTP-SCPOE-2424-HP
TypeOther
ColorBlack

Questions about this item

How do I wire the solar panel and PoE inputs to the screw terminals and RJ45 ports, and what is the common mistake?

Connect solar wires to the four screw terminals accepting up to 10 AWG and PoE cables to the two shielded RJ45 jacks; the step often missed is verifying battery polarity before powering up, since the reverse-polarity LED only warns after connection.

Which parts will need replacement over time and how often?

The external standard fuse is the only user-replaceable component; it should be swapped after any over-current event, while the controller itself has no scheduled maintenance items.

What is the first limit reached during continuous high-load operation?

The PoE output is capped at 24 V 1 A and the secondary terminal at 24 V 1.5 A, so the 1.5 A terminal limit is reached first under sustained draw.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.