We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
White rectangular PoE injector with shielded RJ45 ports and AC power input

Tycon Power Systems

Tycon Power Systems TP-POE-HP-24G 24V 24W Gigabit PoE Injector

SKU CH-ARR0-8BQ6N

Delivers 24 V DC at 24 W over Gigabit Ethernet up to 100 m using pins 4,5 and 7,8 with surge and overload protection

  • TypePoE Injector
  • Gigabit data passthrough with shielded RJ45 ports
  • 24V 24W passive PoE on pins 4,5 and 7,8
  • Auto-ranging 90-264VAC 50/60Hz input
  • 5% regulated DC output with surge and overload protection
  • Up to 100m (328 feet) Ethernet distance support

High-Power 24 V Passive PoE Injector

The Tycon TP-POE-HP-24G delivers 24 W of regulated 24 V DC power over a single shielded RJ45 cable to compatible remote devices. It accepts Gigabit data input and provides combined Gigabit data and power output using the unused Ethernet pins four, five, seven and eight. Installers and network integrators use it to power wireless access points, IP cameras or VoIP phones where no local AC outlet exists.

Sustained Load Behaviour

The autoranging input accepts AC mains from 90 to 264 VAC at 50 or 60 Hz without manual switching. Output voltage stays within five percent regulation while supplying the full 24 W continuously. Built-in surge, short-circuit and overload protections engage automatically during fault conditions, allowing the injector to maintain operation through transient events on long cable runs up to 100 m.

Thermals, Noise and Power Draw

With no moving parts the unit runs silently in normal indoor or sheltered outdoor installations. Power consumption at the wall varies with load but never exceeds the 24 W output rating plus conversion losses. The sealed enclosure dissipates heat passively, so the injector adds no audible noise to equipment closets or ceiling mounts.

Highlights

  • Gigabit data passthrough with shielded RJ45 ports
  • 24V 24W passive PoE on pins 4,5 and 7,8
  • Auto-ranging 90-264VAC 50/60Hz input
  • 5% regulated DC output with surge and overload protection
  • Up to 100m (328 feet) Ethernet distance support

Specifications

BrandTycon
TypePoE Injector

Questions about this item

How much heat or noise does the TP-POE-HP-24G produce when powering a device continuously?

The injector supplies a regulated 24V DC at 24W with built-in surge, short-circuit and overload protection, and it has no moving parts, so it runs silently and generates only modest warmth during all-day operation.

What cables and devices must I already have to use this injector?

You need a shielded Cat5e or better Ethernet cable for the data-in link, a second shielded cable for the powered data-out run up to 100m, a remote device that accepts passive 24V PoE on pins 4,5 and 7,8, and a standard AC mains cord for the 90–264VAC input.

Will the passive 24V output on pins 4,5 and 7,8 work with older 10/100 equipment I want to keep?

Yes, the injector passes Gigabit data through all four pairs while injecting 24V on the spare pairs, so legacy 10/100 devices that expect passive 24V PoE on those pins will receive both power and data without re-cabling.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.