We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Small rectangular network injector with shielded RJ45 ports and AC power input

Tycon Power Systems

Tycon Power Systems TP-POE-48G 48V PoE Injector

SKU CH-W98M-D9N6Z MPN TP-POE-48G

Supplies up to 24 W of regulated 48 V DC power over shielded Gigabit Ethernet up to 100 m with surge, short-circuit and over-voltage protection

  • TypePoE Injector
  • Delivers up to 24W PoE power for efficient device operation
  • Auto-ranging 90-264VAC input ensures worldwide compatibility
  • Surge, short-circuit, overload and overvoltage protection safeguards connected equipment
  • Shielded RJ45 ports maintain signal integrity up to 100m distance
  • Regulated 48-56V DC output with 5% load regulation provides stable power

Tycon 48V PoE Injector

The Tycon TP-POE-48G is a midspan power source that adds 48 volt Power over Ethernet to an existing data line. It accepts AC input from 90 to 264 volts and delivers regulated DC power up to 24 watts on pins four, five, seven and eight of a shielded RJ45 output jack. Surge, short circuit, overload and overvoltage protections are built in for reliable operation in tough conditions.

Installers running cable up to 100 metres

This injector suits installers who need to power a single 48 volt PoE device such as a wireless access point or IP camera over standard Ethernet cable up to 100 metres. It is not for buyers who need 802.3 af or 802.3 at negotiation, who require Gigabit Ethernet throughput, or who must supply more than 24 watts to a high-power device.

48 volt 24 watt passive PoE output

The single specification that decides fit is the 48 volt passive PoE output limited to 24 watts on the unused Ethernet pairs. Verify that the remote device accepts 48 volts on pins four, five, seven and eight and draws no more than 24 watts before purchase.

Highlights

  • Delivers up to 24W PoE power for efficient device operation
  • Auto-ranging 90-264VAC input ensures worldwide compatibility
  • Surge, short-circuit, overload and overvoltage protection safeguards connected equipment
  • Shielded RJ45 ports maintain signal integrity up to 100m distance
  • Regulated 48-56V DC output with 5% load regulation provides stable power

Specifications

BrandTycon
ModelTP-POE-48G
TypePoE Injector

Questions about this item

Will the TP-POE-48G work with my existing 100m Ethernet cable runs?

Yes, the injector supports the Ethernet specification distance of up to 100m (328 feet) using standard CAT5 cabling, so your current cable lengths are compatible.

How can I verify the TP-POE-48G is delivering power to my connected device after installation?

The unit supplies regulated 48-56V DC output on pins 4, 5 (V+) and 7, 8 (V-); confirm the remote device powers on and establishes a data link through the surge-protected output jack.

Does the TP-POE-48G package include the AC power cord and Ethernet patch cables, or must I buy them separately?

The injector accepts autoranging 90-264VAC input and provides dual shielded RJ45 jacks for data-in and data-out/power; AC cord and Ethernet cables are not included and must be sourced separately.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.