We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Chrome-plated brass M18 threaded barrel inductive sensor with cable connection

Turck

Turck NI8-M18-LIU 1536100 inductive sensor M18 15 30 VDC 136 g

SKU CH-22B7-DDWN7 MPN NI8-M18-LIU

M18 inductive sensor with analog 0–10 V and 0–20 mA output, 15–30 VDC supply, chrome-plated brass barrel, non-flush mount, 136 g

  • TypeTest Equipment
  • Item Count1 pack
  • Selling UnitBox
  • Parts3 Years
  • Labor1 Year
  • Analog 0…10 V and 0…20 mA output for versatile control
  • 15…30 VDC supply works with common industrial power rails
  • M18 × 1 threaded brass barrel mounts securely in standard holes
  • Non-flush design allows side or front sensing without metal interference
  • 136 g chrome-plated housing resists corrosion in harsh environments

M18 inductive analog sensor

This inductive sensor uses an M18 × 1 threaded brass barrel with a chrome-plated finish. It operates from a 15 to 30 VDC supply and provides both 0…10 V and 0…20 mA analog outputs through a fixed cable connection. The housing weighs 136 g and is rated for non-flush mounting. Order number 1536100 identifies this specific Turck model.

Suited for continuous position monitoring

Engineers who need a continuous voltage or current signal proportional to target distance will find the dual analog outputs useful. The 5 mm maximum measuring range and non-flush mounting requirement limit use to applications where the sensing face can protrude. Buyers who need a simple on/off switching signal or a flush-mountable housing should look at a different sensor type.

Dual 0…10 V and 0…20 mA outputs

The defining specification is the simultaneous availability of a 0…10 V voltage output and a 0…20 mA current output from the same four-wire device. This allows direct connection to either voltage-input or current-input analogue modules without a separate converter. Verify that your controller accepts one of these signal ranges before ordering.

Highlights

  • Analog 0…10 V and 0…20 mA output for versatile control
  • 15…30 VDC supply works with common industrial power rails
  • M18 × 1 threaded brass barrel mounts securely in standard holes
  • Non-flush design allows side or front sensing without metal interference
  • 136 g chrome-plated housing resists corrosion in harsh environments

Specifications

BrandTURCK
ModelNI8-M18-LIU 1536100
TypeTest Equipment
Item Count1 pack
Selling UnitBox
Parts3 Years
Labor1 Year

Questions about this item

What voltage supply must I already have to run this 15…30 VDC inductive sensor?

You need a DC power source that delivers between 15 V and 30 V; the sensor will not operate outside that window.

Will the M18 × 1 threaded barrel fit the mounting holes I already use for other M18 sensors?

Yes — the housing uses a standard M18 × 1 thread, so it matches existing M18 cut-outs and nuts.

How can I verify the analog output is working after I wire the 4-wire cable?

Apply power, bring a metal target into the 5 mm range, and confirm the signal moves smoothly between 0…10 V and 0…20 mA.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.