Turck
Turck Ni25-G47-AP4X 15646 inductive sensor PNP 10-65 VDC 25mm non-flush
Inductive sensor with PNP output and 25 mm switching distance for 10 to 65 VDC non-flush mounting
- TypeTest Equipment
- Item Count1 pack
- Selling UnitBox
- Parts3 Years
- Labor1 Year
- 25 mm sensing range detects metal at distance
- PNP normally-open output simplifies control wiring
- 10–65 VDC supply suits wide power sources
- Chrome-plated brass housing resists harsh environments
- Non-flush mountable G47 barrel fits standard threads
Inductive sensor PNP output
The Turck Ni25-G47-AP4X 15646 is an inductive proximity sensor with a PNP normally open output. It operates on a 10 to 65 VDC supply and features a threaded G47 barrel made from chrome-plated brass. The unit connects via a cable and weighs 333 g.
Non-flush mounting applications
This sensor suits installations where non-flush mounting is required and a 25 mm switching distance is needed. It is not for applications that require flush mounting or a different output type such as NPN or normally closed logic.
25 mm rated switching distance
The rated switching distance of 25 mm determines if this sensor fits the detection range required by the application. Verify this figure against the target distance and material before purchase.
Highlights
- 25 mm sensing range detects metal at distance
- PNP normally-open output simplifies control wiring
- 10–65 VDC supply suits wide power sources
- Chrome-plated brass housing resists harsh environments
- Non-flush mountable G47 barrel fits standard threads
Specifications
| Brand | TURCK |
|---|---|
| Model | Ni25-G47-AP4X 15646 |
| Type | Test Equipment |
| Item Count | 1 pack |
| Selling Unit | Box |
| Parts | 3 Years |
| Labor | 1 Year |
Questions about this item
Will the Ni25-G47-AP4X inductive sensor fit alongside my existing PG36 threaded barrel mounts?
Yes, the sensor uses a threaded barrel, PG36 construction size that matches standard PG36 mounts, allowing direct installation without adapters.
How can I verify the sensor is detecting targets correctly after wiring the 10…65 VDC PNP output?
When a metal target enters the 25 mm rated switching distance, the NO contact closes and the PNP output switches high; measure the output voltage relative to 0 V to confirm it follows the target presence.
Does the box include a mounting nut or cable glands, or must I order them separately?
The sensor is supplied as a single unit in a box with a 333 g chrome-plated brass housing and integral cable; mounting nuts and cable glands are not included and must be sourced separately.
Also in this aisle
People compared these
Same shelf, same checkout — eight coins and a 30-minute rate lock.
